Do you have the phase (invert/no invert) for PTT and/or COS in radio settings set correctly? When you are in CLI can you key/unkey (URI red light) manually with susb or radio command? Can you see radio key/unkey status on the screen? (hungup on screen) Can you see DTMF characters displayed as you type them on the keyed radio? 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Sat, 19 Apr 2014 18:21:54 -0700 Subject: Re: [App_rpt-users] odd URIx behavior From: 41.2jim@gmail.com To: doug@crompton.com It's set at duplex 1 simplex node thats whats confusing Jim Frederick KF6QBW I Live to Transmit & Transmit to Live 446.600- 103.5 PL Repeater AllStar Node # 28839 Skype = jim41.2 On Sat, Apr 19, 2014 at 6:02 PM, Doug Crompton <doug@crompton.com> wrote: Sure sounds like you have duplex=2 in rpt.conf. If this is a simplex node set duplex=1 The install default is 2 - it really should be 1 as this would solve a lot of novice startup issues! 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Sat, 19 Apr 2014 15:50:36 -0700 From: 41.2jim@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] odd URIx behavior green lite flashes like it is working but no receive audio until.... you kerchunk the node(weather connected to another node or HUB same issue must kerchunk it to here the audio and looks correct on the CLI screen connecting or disconnecting with no on screen errors at verbose 3) and then you get receive and when in TX no output audio at all and if you hold the the HT key the node will drop and come back to TX and drop again and will go on for ever (well 5 minutes worth) seems to hold TX for like 2 seconds then un-keys (drops TX) then keys up again on its own. History: the node did work for one day (both tx/rx) and the owner turned off the node, and unplugged for a thunder storm and on power up had this issue next day. After 3 different computers and same problem I'm left with either a software issue in the install(all 3 computers not likely) or its the URIx its self. I have set up 6 different Allstar nodes and have ran into a bunch of different problems and got them all fixed with the help of this group and I'm turning to the group again for help ....any ideas?? Thank you all in advance for the help Jim Frederick KF6QBW I Live to Transmit & Transmit to Live 446.600- 103.5 PL Repeater AllStar Node # 28839 Skype = jim41.2 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.