rpt.conf [2064] rxchannel = Zap/2 ; Rx audio/signalling channel remote = tm271 ; Enable to support Kenwood TMG-707 ioport=/dev/ttyUSB0 functions = remote-functions ; Remote function list ;telemetry=telemetry2 statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates ; Remote function table [remote-functions] 0=remote,1 ; Retrieve Memory 1=remote,2 ; Set freq. 2=remote,3 ; Set tx PL tone 3=remote,4 ; Set rx PL tone 40=remote,100 ; Rx PL off 41=remote,101 ; Rx PL on 42=remote,102 ; Tx PL off 43=remote,103 ; Tx PL on 44=remote,104 ; Low Power 45=remote,105 ; Medium Power 46=remote,106 ; High Power ;711=remote,107 ; Bump -20 ;714=remote,108 ; Bump -100 ;717=remote,109 ; Bump -500 ;713=remote,110 ; Bump +20 ;716=remote,111 ; Bump +100 ;719=remote,112 ; Bump +500 ;721=remote,113 ; Scan - slow ;724=remote,114 ; Scan - quick ;727=remote,115 ; Scan - fast ;723=remote,116 ; Scan + slow ;726=remote,117 ; Scan + quick ;729=remote,118 ; Scan + fast ;79=remote,119 ; Tune 51=remote,5 ; Long status query 52=remote,140 ; Short status query ;6=remote,6 ; Set mode ;8=remote,99 ; remote base log in ;9=cop,6 ; Phone PTT command 8226242=remote,99,WB6NIL,G ;Jim 80401=remote,99,WA6ZFT,E ;Steve 80113=remote,99,KE6UPI,F ;David Shaw 80114=remote,99,W4WWM,T ;Will 80210=remote,99,WA6SYN,G ;Bob Hatfield 80211=remote,99,WD6V,G :David K. [nodes] ; Note, if you are using automatic update for allstar link nodes, ; no allstar link nodes should be defined here. Only place a definition ; for your locak nodes, and private (off of allstar link) nodes here. 2063 = radio@127.0.0.1:4569/2063,NONE ; This must be changed to your node number 2064 = radio@127.0.0.1:4569/2064,NONE,y **Extras** ; Memories for remote bases [memory] ; Call Simplex 11 = 146.520,100.0,sm ; Simplex 12 = 146.550,100.0,sm ; FARC FallBrook Red MTN 13 = 146.175,107.2,+mt ; GTARC Temecula, Ca 14 = 146.805,100.0,-mt [macro] 11 = *32064*42064*80113*011# ;2M Simplex 12 = *32064*42064*80113*012# ;2M Simplex 146.550 13 = *32064*42064*80113*013# ;Red MTN --------------------------------------------------------------------------------------- iax.conf you'll need to add register=2064:297615@register.allstarlink.org Later, I'll write up a howto for the TM271. -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Sun, Dec 2, 2018 at 6:24 PM Kevin Babich <kevin.babich@gmail.com> wrote:
Dave,
Wiring is straight forward, best as I can tell. Configuration for programming, is my interest.
Best,
Kevin J. Babich
219.406.9707 Mobile
***Mobile EMail***
Please excuse any typos and brevity.
On Dec 2, 2018, at 7:28 PM, David Shaw <shawpbx@gmail.com> wrote:
Sorry I'm out of town. What are you looking for? Wiring or Configuration?
-- Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson
On Sat, Dec 1, 2018 at 2:10 PM Kevin Babich <kevin.babich@gmail.com> wrote:
David,
Would you be willing to share the implementation? I’d like to plagiarize your method for programming the 271.
Best,
Kevin J. Babich
219.406.9707 Mobile
***Mobile EMail***
Please excuse any typos and brevity.
On Dec 1, 2018, at 3:50 PM, David Shaw <shawpbx@gmail.com> wrote:
Yes, Both the TM-271 and the TM-D700.
TM-271a using a Raspberry Pi, USB programming cable and a URI. TM-D700 old school using the 4 port AllStarLink card that Steve (WA6ZFT) and Jim (WB6NIL) designed.
David
-- Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson
On Fri, Nov 30, 2018 at 3:19 PM Kevin Babich <kevin.babich@gmail.com> wrote:
Greetings,
Has anyone successfully integrated a Kenwood radio into Allstar with full Remote Base functionality (frequency, offset, etc.)? If so, can you please share which radio was integrated / interfacing / etc.?
Kindest Regards,
Kevin Babich | N9IAA
Valparaiso, IN 46383
Mobile: 219.406.9707
Cessna 421
Cesssna Conquest I/II
Beechcraft King Air 90/200
“…It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat...” -Theodore Roosevelt
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.