From the asterisk CLI prompt: iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 1234 123.456.789.001:22239 60 Registered Should look like above. Check your iax.conf for the proper node number and password. 73, Steve N4IRS On 5/1/2017 3:34 PM, Erich Ellsworth wrote:
Greetings,
I am currently using a Cisco 7960 connected to my Raspberry Pi 3 to mess around with AllStarLink. (Node 43966) Currently, I am able to connect to other nodes perfectly, however I am unable to receive connections from other nodes.
According to this troubleshooting guide <http://docs.allstarlink.org/drupal/node/164>, the issue could be the following...
1.) Port 4569 UDP is not set up to be forwarded to the correct internal address. 2.) My router requires that the port setting to be forced to port 4569 on the registration server.
I believe that #1 is ruled out because I have double checked that the internal address is correct. (My router is a Asus RT-AC68P)
Could a system administrator double check that my node is registering properly?
Thanks,
Erich KG5KEY
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.