While what you did is feasible (before you got disconnected), I would suggest that anyone monitoring on the WAN or WIN systems would see their bubble maps grow in size significantly. This ad-hoc growth in size, which was probably not brokered with managers on either or both sides, saw a reaction from one or both to disconnect which is not unexpected. Both systems are looking to run tight ships with best enforcement of audio / connection standards. This would be my take of the situation. Keith On 5/13/15 9:27 AM, "Skyler Fennell" <electricity440@gmail.com> wrote:
I just used *2
I also tested it this morning, connecting to two neighboring nodes in monitor. They did not hear each other when I keyed up on their repeaters.
If anybody is a part of the WAN system, tell me if there was a situation last night probably around 12pm east coast time, (10pm mountain here) where the WIN system audio went through. If not, is there a reason why you disconnected me?
Thanks, Skyler
On May 13, 2015, at 7:22 AM, Keith Goobie <keith@goobie.org> wrote:
In theory no, but what commands did you issue to go into monitor mode on both?
Keith
On 5/13/15 8:30 AM, "Skyler Fennell" <electricity440@gmail.com> wrote:
Last night I was connected to two nodes in monitor, the win system and the wan system because I wanted to listen only to the traffic. Will the two networks hear each other because the wan system disconnected me. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA