Location may depend on your version of app_rpt... the following file in the DIAL src files contains the list of ctcss frequencies. Changes at this level will require editing code and recompiling. CTCSS codes are considered a standard for all radios. In other words, you may make the change to app_rpt, but may not find a radio that can implement it. /usr/src/astsrc-1.4.23-pre/asterisk/channels/xpmr/xpmr_coef.h http://docs.allstarlink.org/drupal/search/node/telemetry Bob kk6ecm -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Mahler Sent: Sunday, February 28, 2016 5:38 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RxCTCSSfreqs / EchoLink Does anyone have information on ... 1) In rpt.conf, setting variable rxctcssfreqs, where is the table of valid RX tones? 2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to the number of tones added to the list? 3) Can the EchoLink section be configured to say ... W9YB Connected ... but NOT say ... to node 41111? ...STeve KF5VH _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.