Does anyone have information on ... 1) In rpt.conf, setting variable rxctcssfreqs, where is the table of valid RX tones? 2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to the number of tones added to the list? 3) Can the EchoLink section be configured to say ... W9YB Connected ... but NOT say ... to node 41111? ...STeve KF5VH
Location may depend on your version of app_rpt... the following file in the DIAL src files contains the list of ctcss frequencies. Changes at this level will require editing code and recompiling. CTCSS codes are considered a standard for all radios. In other words, you may make the change to app_rpt, but may not find a radio that can implement it. /usr/src/astsrc-1.4.23-pre/asterisk/channels/xpmr/xpmr_coef.h http://docs.allstarlink.org/drupal/search/node/telemetry Bob kk6ecm -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Mahler Sent: Sunday, February 28, 2016 5:38 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RxCTCSSfreqs / EchoLink Does anyone have information on ... 1) In rpt.conf, setting variable rxctcssfreqs, where is the table of valid RX tones? 2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to the number of tones added to the list? 3) Can the EchoLink section be configured to say ... W9YB Connected ... but NOT say ... to node 41111? ...STeve KF5VH _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I can only refer to ACID
Does anyone have information on ...
1) In rpt.conf, setting variable rxctcssfreqs, where is the table of valid RX tones?
Someone might correct me if I am wrong but "I believe" any tone is valid. You are using the freq in hz with decimal (100.0,103.5) and it is generated/decoded in dsp. Non-standard tones 'should' be able to be generated/decoded.
2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to the number of tones added to the list?
Perhaps someone knows but I have never seen it written as to a limit. Not much help on that one... Try as many as you need and see if it works.
3) Can the EchoLink section be configured to say ... W9YB Connected ... but NOT say ... to node 41111?
No, you will have the 'connected to' or nothing. eannmode=2 ;0=no announcements, 1=node number(Allstar-xlated), 2=callsign, 3=both http://ohnosec.org/drupal/node/107 It 'should be possible' to shut it off and make your own scripting using a "ON-EVENT" looking for connections from a 3xxxxx node (that were not there previously) to then speak what you want. But I have not done that myself. http://ohnosec.org/drupal/node/176 ...mike/kb8jnm
...STeve KF5VH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
rxsctcssfreqs and txctcssfreqs are defined in the usbradio.conf file not rpt.conf. Jon VA3RQ On 2/28/2016 11:07 PM, mike@midnighteng.com wrote:
I can only refer to ACID
Does anyone have information on ...
1) In rpt.conf, setting variable rxctcssfreqs, where is the table of valid RX tones? Someone might correct me if I am wrong but "I believe" any tone is valid. You are using the freq in hz with decimal (100.0,103.5) and it is generated/decoded in dsp. Non-standard tones 'should' be able to be generated/decoded.
2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to the number of tones added to the list? Perhaps someone knows but I have never seen it written as to a limit. Not much help on that one... Try as many as you need and see if it works.
3) Can the EchoLink section be configured to say ... W9YB Connected ... but NOT say ... to node 41111? No, you will have the 'connected to' or nothing. eannmode=2 ;0=no announcements, 1=node number(Allstar-xlated), 2=callsign, 3=both
http://ohnosec.org/drupal/node/107
It 'should be possible' to shut it off and make your own scripting using a "ON-EVENT" looking for connections from a 3xxxxx node (that were not there previously) to then speak what you want. But I have not done that myself.
http://ohnosec.org/drupal/node/176
...mike/kb8jnm
...STeve KF5VH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--- This email is free from viruses and malware because avast! Antivirus protection is active. https://www.avast.com/antivirus
Thanks for the suggestions! ...STeve On 2/28/2016 7:37 PM, Steve Mahler wrote:
Does anyone have information on ...
1) In rpt.conf, setting variable rxctcssfreqs, where is the table of valid RX tones?
2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to the number of tones added to the list?
3) Can the EchoLink section be configured to say ... W9YB Connected ... but NOT say ... to node 41111?
...STeve KF5VH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Jon Rorke -
kk6ecm -
mike＠midnighteng.com -
Steve Mahler