Thanks Matt, I noticed the option in sourcecode. Regards, Bogdan
The feature you need is already built in to the system.
Look for "Rxondelay" in USBradio.conf
This will allow you to set the time during which the Rx COS is ignored, after the PTT is dropped.
I have used this in the past to stop two linked repeaters ping ponging.
Regards,
Matt
On 12 October 2010 17:42, Bogdan Diaconescu <yo3iiu@yo3iiu.ro> wrote:
Hello,
I'm using app_rpt to build a repeater system using COR and PTT signaling. The issue I'm having is that after each PTT off I got a COR enable from rig for a constant amount of time of 30ms which triggers another PTT on and so on. Therefore I'm looking for a solution to overcome this problem.
Specifically, what I need is an option that will trigger COR to app_rpt only when COR was active for an user specified period of time (say 50ms in my case).
Thanks and regards, Bogdan - YO3IIU
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users