Yes, you can have any number of repeaters linked together and any received signal on one repeater is repeated on all the other repeaters. It's also a complete repeater controller or you can connect it to a port of an existing controller. You can also use it to build simplex nodes, remote bases and conference bridges. With the proper hardware it can also be a voter/simulcast repeater system. -- Tim :wq On Dec 6, 2011, at 12:56 PM, Robert A. Poff WB3AWJ wrote:
OK, maybe I'm confused.....
You build repeater A as an Allstar node. You build repeater B as an Allstar node. You put them both on a common network. You dial from repeater A to repeater B.
What comes in A goes out A & B. What comes in B goes out A & B.
That's what you want correct? That's what the software does.
Robert A. Poff Loganville, PA.
"Lieutenant, target the offending power boat and launch photon torpedoes"
Subject: Re: [App_rpt-users] Two remote nodes used to link two repeaters
Ron
Are you trying to set up two repeaters that are linked so that the input from one is transmitted by both? If so, I am also very interested in how it is done as it is something we are proposing in our area.
Howard VK4BS
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users