Two remote nodes used to link two repeaters
Hello, I'm new to Asterisk+app_rpt. Will this application connect two transceivers (remote nodes) using VoIP so that each transceiver node will transmit what it receives over the VoIP input from the RF receiving transceiver node? If it will, I'd appreciate some discussion as to how to setup this type of connection or direction to directions, if already written. I've been back reading the archives and have read most of this year's discussions. Lots of good info on this reflector. Thanks for your consideration. Ron Morell KA7U
Yep, that's the whole point. Read here https://allstarlink.org/ and here http://ohnosec.org/drupal/ Download the iso and start playing. -- Tim :wq On Dec 6, 2011, at 7:01 AM, Ron Morell wrote:
Hello, I'm new to Asterisk+app_rpt. Will this application connect two transceivers (remote nodes) using VoIP so that each transceiver node will transmit what it receives over the VoIP input from the RF receiving transceiver node? If it will, I'd appreciate some discussion as to how to setup this type of connection or direction to directions, if already written.
I've been back reading the archives and have read most of this year's discussions. Lots of good info on this reflector.
Thanks for your consideration. Ron Morell KA7U
<ron.vcf>_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Ron Are you trying to set up two repeaters that are linked so that the input from one is transmitted by both? If so, I am also very interested in how it is done as it is something we are proposing in our area. Howard VK4BS -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Ron Morell Sent: Wednesday, 7 December 2011 01:01 To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Two remote nodes used to link two repeaters Hello, I'm new to Asterisk+app_rpt. Will this application connect two transceivers (remote nodes) using VoIP so that each transceiver node will transmit what it receives over the VoIP input from the RF receiving transceiver node? If it will, I'd appreciate some discussion as to how to setup this type of connection or direction to directions, if already written. I've been back reading the archives and have read most of this year's discussions. Lots of good info on this reflector. Thanks for your consideration. Ron Morell KA7U
OK, maybe I'm confused..... You build repeater A as an Allstar node. You build repeater B as an Allstar node. You put them both on a common network. You dial from repeater A to repeater B. What comes in A goes out A & B. What comes in B goes out A & B. That's what you want correct? That's what the software does. Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes"
Subject: Re: [App_rpt-users] Two remote nodes used to link two repeaters
Ron
Are you trying to set up two repeaters that are linked so that the input from one is transmitted by both? If so, I am also very interested in how it is done as it is something we are proposing in our area.
Howard VK4BS
Yes, you can have any number of repeaters linked together and any received signal on one repeater is repeated on all the other repeaters. It's also a complete repeater controller or you can connect it to a port of an existing controller. You can also use it to build simplex nodes, remote bases and conference bridges. With the proper hardware it can also be a voter/simulcast repeater system. -- Tim :wq On Dec 6, 2011, at 12:56 PM, Robert A. Poff WB3AWJ wrote:
OK, maybe I'm confused.....
You build repeater A as an Allstar node. You build repeater B as an Allstar node. You put them both on a common network. You dial from repeater A to repeater B.
What comes in A goes out A & B. What comes in B goes out A & B.
That's what you want correct? That's what the software does.
Robert A. Poff Loganville, PA.
"Lieutenant, target the offending power boat and launch photon torpedoes"
Subject: Re: [App_rpt-users] Two remote nodes used to link two repeaters
Ron
Are you trying to set up two repeaters that are linked so that the input from one is transmitted by both? If so, I am also very interested in how it is done as it is something we are proposing in our area.
Howard VK4BS
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Howard, Lets work on this off the reflector. I received several sincere offers of advice and help in the direct email, but I notice a fair group of wasted responses sent only to the reflector. I'll share with you what I'm doing and how we go about it using direct email. So for the management of the reflector; A query posted here is given a good response, but for some reason, the best responders did not reply through the reflector. 73, Ron Morell KA7U
participants (4)
-
Howard Small -
Robert A. Poff WB3AWJ -
Ron Morell -
Tim Sawyer