OK I took Tom's advice and read the previous threads, and put in a P instead of an X and also put in NODE = 29600 under the global standard. I don't know which worked, but the problem is solved. Thanks Everyone. From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Agee Sent: Friday, July 29, 2016 12:45 PM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] IAXRPT issue on Android Are you referring to IAXRPT being run from a Windows desktop/laptop or from a phone? N5ZUA On 7/29/2016 2:41 PM, John Griffith wrote: Anyone here experiencing the network keying up when IAXRPT is started? Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine. The Admins of the repeater system I connected to had to disable my node because I didn't know it was keying up all the repeaters, and I didn't know it. John Griffith N7OKN _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.