IAXRPT issue on Android
Anyone here experiencing the network keying up when IAXRPT is started? Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine. The Admins of the repeater system I connected to had to disable my node because I didn't know it was keying up all the repeaters, and I didn't know it. John Griffith N7OKN
Are you referring to IAXRPT being run from a Windows desktop/laptop or from a phone? N5ZUA On 7/29/2016 2:41 PM, John Griffith wrote:
Anyone here experiencing the network keying up when IAXRPT is started?
Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine.
The Admins of the repeater system I connected to had to disable my node because I didn’t know it was keying up all the repeaters, and I didn’t know it.
John Griffith
N7OKN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
OK I took Tom's advice and read the previous threads, and put in a P instead of an X and also put in NODE = 29600 under the global standard. I don't know which worked, but the problem is solved. Thanks Everyone. From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Agee Sent: Friday, July 29, 2016 12:45 PM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] IAXRPT issue on Android Are you referring to IAXRPT being run from a Windows desktop/laptop or from a phone? N5ZUA On 7/29/2016 2:41 PM, John Griffith wrote: Anyone here experiencing the network keying up when IAXRPT is started? Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine. The Admins of the repeater system I connected to had to disable my node because I didn't know it was keying up all the repeaters, and I didn't know it. John Griffith N7OKN _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
John: I have the same thing ... Samsung Galaxy 4 with OS 5.0.1, Kernel 3.4.0-6185444 ...STeve - KF5VH On 7/29/2016 2:41 PM, John Griffith wrote:
Anyone here experiencing the network keying up when IAXRPT is started?
Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine.
The Admins of the repeater system I connected to had to disable my node because I didn’t know it was keying up all the repeaters, and I didn’t know it.
John Griffith
N7OKN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Steve, just change the X to a P [radio-iaxrpt] exten => 29600,1,Rpt,29600|P) And then under Globals: [globals] NODE = 29600 From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Mahler Sent: Friday, July 29, 2016 12:48 PM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] IAXRPT issue on Android John: I have the same thing ... Samsung Galaxy 4 with OS 5.0.1, Kernel 3.4.0-6185444 ...STeve - KF5VH On 7/29/2016 2:41 PM, John Griffith wrote: Anyone here experiencing the network keying up when IAXRPT is started? Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine. The Admins of the repeater system I connected to had to disable my node because I didn't know it was keying up all the repeaters, and I didn't know it. John Griffith N7OKN _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
John, The Android IAXRPT client works fine for me. You tap the PTT button to enable transmit, and tap it again to disable transmit. You're not supposed to hold it down. That may be were the confusion lies. Thanks! On Fri, Jul 29, 2016 at 2:41 PM, John Griffith <jcarl.griffith@gmail.com> wrote:
Anyone here experiencing the network keying up when IAXRPT is started?
Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine.
The Admins of the repeater system I connected to had to disable my node because I didn’t know it was keying up all the repeaters, and I didn’t know it.
John Griffith
N7OKN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Andrew Sylthe KC9ONA
Its when I open iaxrpt and send my node number to connect. My repeater throws a dead carrier (ptt white) until I touch it to make it red, then touch it again to make it white, then the transmit condition stops. Any ideas? On Jul 29, 2016 12:55 PM, "Andrew Sylthe" <asylthe@kc9ona.com> wrote:
John,
The Android IAXRPT client works fine for me. You tap the PTT button to enable transmit, and tap it again to disable transmit. You're not supposed to hold it down. That may be were the confusion lies.
Thanks!
On Fri, Jul 29, 2016 at 2:41 PM, John Griffith <jcarl.griffith@gmail.com> wrote:
Anyone here experiencing the network keying up when IAXRPT is started?
Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine.
The Admins of the repeater system I connected to had to disable my node because I didn’t know it was keying up all the repeaters, and I didn’t know it.
John Griffith
N7OKN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Andrew Sylthe KC9ONA
On Fri, Jul 29, 2016 at 12:41 PM, John Griffith <jcarl.griffith@gmail.com> wrote:
Anyone here experiencing the network keying up when IAXRPT is started?
Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine.
The Admins of the repeater system I connected to had to disable my node because I didn’t know it was keying up all the repeaters, and I didn’t know it.
Yes, we discussed it last week: http://ohnosec.org/pipermail/app_rpt-users/2016-July/014622.html The solution was to change the Rpt command to P mode. This differs from the X mode which works for IAXRPT for Windows. http://ohnosec.org/pipermail/app_rpt-users/2016-July/014628.html Tom KD7LXL
Apparently my post didn't go, so here is again. OK I took Tom’s advice and read the previous threads, and put in a P instead of an X and also put in NODE = 29600 under the global standard. I don’t know which worked, but the problem is solved. Thanks Everyone. -----Original Message----- From: Tom Hayward [mailto:tom@tomh.us] Sent: Friday, July 29, 2016 1:16 PM To: John Griffith <jcarl.griffith@gmail.com> Cc: APP RPT <App_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] IAXRPT issue on Android On Fri, Jul 29, 2016 at 12:41 PM, John Griffith <jcarl.griffith@gmail.com> wrote:
Anyone here experiencing the network keying up when IAXRPT is started?
Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine.
The Admins of the repeater system I connected to had to disable my node because I didn’t know it was keying up all the repeaters, and I didn’t know it.
Yes, we discussed it last week: http://ohnosec.org/pipermail/app_rpt-users/2016-July/014622.html The solution was to change the Rpt command to P mode. This differs from the X mode which works for IAXRPT for Windows. http://ohnosec.org/pipermail/app_rpt-users/2016-July/014628.html Tom KD7LXL
John, You may want to specify version of the app, device, OS version, Bluetooth/Handsfree/Headset in the future. I am sure this will help diagnose any issues you may have. Mike On Fri, Jul 29, 2016 at 3:41 PM, John Griffith <jcarl.griffith@gmail.com> wrote:
Anyone here experiencing the network keying up when IAXRPT is started?
Apparently you have to touch PTT and touch again on the Android before it will release, then it works fine.
The Admins of the repeater system I connected to had to disable my node because I didn’t know it was keying up all the repeaters, and I didn’t know it.
John Griffith
N7OKN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (6)
-
Andrew Sylthe -
John Griffith -
Mike Zingman -
Steve Agee -
Steve Mahler -
Tom Hayward