When you switch your node from DHCP to static IP, the name server in resolv.conf gets blown away. So the box doesn't get dns access. So edit your /etc/resolv.conf file and put a name server of: nameserver 8.8.8.8 Reboot, then you should be able to connect out and in. By the way you may need to wait 10 -15 minutes before thew node is fully active. Once you node shows up in the Allstar active node list, it takes that long before most nodes find you IP address. If you have dhcp set up this file automatically gets populated with a DNS that points to your IP provider or local router IP. Jon VA3RQ On 7/2/2014 12:34 PM, stephen liggett wrote:
Trouble Getting Registered
When I set up a static IP address, my asterisk does not register. When I am in DHCP, it does register, but I cannot receive calls. (I am able to call out to most other nodes).
This is my [root@test network-scripts]# cat ifcfg-eth0
DEVICE=eth0 BOOTPROTO=none HWADDR=00:14:22:28:8c:90 ONBOOT=yes DHCP_HOSTNAME=test TYPE=Ethernet IPADDR=192.168.1.30 NETMASK=255.255.255.0 GATEWAY=192.168.1.1
Does anything look wrong with this?
The port 4569 is forwarded on the ASIS router. IRLP works fine, BTW (whatever that means!). And I can shell in, ping sites, etc.
Or, maybe something else is adrift. Any suggestions would be helpful.
steve W3RX
On Jul 2, 2014, at 10:43 AM, app_rpt-users-request@ohnosec.org wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Re: Error 1 (Skyler F) 2. Re: Error 1 (Bob)
----------------------------------------------------------------------
Message: 1 Date: Wed, 2 Jul 2014 08:29:15 -0600 From: Skyler F <electricity440@gmail.com> To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Error 1 Message-ID: <CAJNyT09jXA+vY5o6OA6g=udZ6Rm5X_zZ=rDtRCZB2ryp5x-H8g@mail.gmail.com> Content-Type: text/plain; charset="utf-8"
I guess it didn't remember the stuff from yesterday, this is all it had today
[Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40764 [Jul 2 07:06:12] NOTICE[2803] app_rpt.c: Normal Repeater Init 40930 [Jul 2 07:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 07:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 07:29:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 07:39:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 07:49:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 07:59:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 08:09:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org [Jul 2 08:19:30] ERROR[2786] chan_echolink.c: connect() failed to connect to the Echolink server server2.echolink.org
On Tue, Jul 1, 2014 at 5:41 PM, Bob <kk6ecm@gmail.com> wrote:
For sure Asterisk is not happy. A shot... sounds like the computer lost your URI/FOB USB address when it lost power. Need to reset using lsusb to identify address and reset devstr= parameters in the USB tune file. I?ve also had this problem when the network settings are not correct, but would bet on the devstr perameters.
Bob
kk6ecm
------------------------------
*From:* app_rpt-users-bounces@ohnosec.org [mailto: app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Skyler F *Sent:* Tuesday, July 01, 2014 4:15 PM *To:* app_rpt-users@ohnosec.org *Subject:* [App_rpt-users] Error 1
I know it is probably on the archive a lot of places, but I am experiencing Error 1 sometimes.
It is sometimes right off the bat when I reboot the system, sometimes not. I had it before, and I decided to reinstall from scratch.
Is there anything i can do about this? The only thing I could think that may have led to this is the power cord accidentally coming loose once when the computer was on.
Asteriscks died with error code 1
Automatically restarting
Asteriscks died with error code 1
Automatically restarting
Asteriscks died with error code 1
Automatically restarting
ETC........................
Thnks for any help.
Skyler Fennell
amsatnet.info
KD?WHB
electricity440@gmail.com
-- Skyler Fennell amsatnet.info KD?WHB electricity440@gmail.com