Thanks Dave, I concur, after I set it that way it's working as intended. I think the verbage of it is what was throwing me off. 73 Stephen K1LNX On Sun, Sep 2, 2018 at 2:26 PM Dave Maciorowski <wa1jhk@macski.us> wrote:
Hi Stephen,
That's how I have my 7330 interface set up:
duplex = 0 linktolink = yes hangtime = 0 althangtime = 0
I think ikt's working as expected.
73,
Dave WA1JHK
On 8/29/2018 6:52 AM, Stephen - K1LNX wrote:
Hi guys, I recently re-built the node that interfaces to my controller, and one of the things I noticed after re-building it that there was a fairly long hang time, anywhere from 5-10 seconds.
I have the following set, and unless I'm misinterpreting how this is expected to work, could this be a potential bug?
duplex = 0 ;0 = Half duplex with no telemetry tones or hang time.
linktolink = yes ; disables forcing physical half-duplex operation of main repeater while ; still keeping half-duplex semantics (optional)
I am still testing, but setting the the hang time to "0" appears to have fixed it, I also tried setting other params to "0" in the wait-times section:
hangtime = 0 ; squelch tail hang time (in ms) (optional, default 5 seconds, 5000 ms)
althangtime = 0 ; longer squelch tail
[wait-times] telemwait = 0 ; Time to wait before sending most telemetry idwait = 500 ; Time to wait before starting ID unkeywait = 0 ; Time to wait after unkey before sending CT's and link telemetry calltermwait = 0 ; Time to wait before announcing "call terminated"
Anyone else run into this, or is this working as expected? Hardware is a Raspberry Pi 3 B+ and Repeater Builder RIM "lite" SCOM interface.
73 Stephen K1LNX
_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link> <#m_-1019317555580606785_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.