From what I see in chan_dahdi.c zapata.conf is replaced by chan_dahdi.conf On 1/27/2015 3:07 PM, Bryan Fields wrote:
My understanding is that Dahdi replaces zaptel on the new kernels. If you read the docs on Dahdi it says to remove all zaptel stuff.
On 1/27/15, 2:50 PM, Steve Zingman wrote:
I would put the files in anyway. Zaptel or not unless there is a dahdi version the kernel module may still be looking for the file.
On 1/27/2015 2:35 PM, Bryan Fields wrote:
No, this is a 3.2 kernel (needed it for the server) so it's dahdi, my old box is running the old stable debian, and its the zaptel drivers which work.
I'll update in a few once I get in front of a pc
On January 27, 2015 2:19:24 PM EST, Steve Zingman <szingman@msgstor.com> wrote:
The node I am running a PCI card is still Squeeze, so it's zaptel but, Are the config files for the PCI card installed? zapata.conf in /etc/asterisk zaptel.conf in /etc
also try to add "options pciradio debug=1" in /etc/modprobe.conf
longshot, but worth asking.
Steve
On 1/27/2015 2:08 PM, Bryan Fields wrote:
Pciradio. I am going to write a longer bug report once I pull it into gdb later today
On January 27, 2015 2:00:59 PM EST, Steve Zingman <szingman@msgstor.com> wrote:
Bryan, Do you get the crash when you start dahdi or when you modprobe pciradio?
Steve
On 1/27/2015 9:51 AM,app_rpt-users-request@ohnosec.org wrote:
Message: 2 Date: Tue, 27 Jan 2015 03:38:27 -0500 From: Bryan Fields<Bryan@bryanfields.net> To:"app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] compile on debian (was More than 4 nodes on a PC) Message-ID:<54C74E83.60203@bryanfields.net> Content-Type: text/plain; charset=ISO-8859-1 On 1/27/15, 1:04 AM, Doug Crompton wrote:
Bryan, Yes you will need Dahdi source. You need to remove Zaptel stuff. I would suggest getting it from the BBB image at hamvoip.org <http://hamvoip.org>. It already has the Allstar patches in it. It is located in /usr/src/utils/dahdi-linux-complete-2.9.1.1 <http://2.9.1.1>+2.9.1 If not you need to download that version of the code from Digium and apply the patches from the Allstar svn site.
I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1 <http://2.10.0.1>+2.10.0.1 <http://2.10.0.1>) and applied the patches from ohnosec svn. hunk 3 on patch 2 needed to be applied by hand, the rest went fine. Dahdi is compiled and installed. I have the ohnosec svn asterisk compiled as well. Copied the sounds in place and started to configure asterisk. I've run into a bit of a problem while loading the pciradio module however. I don't know enough about kernel coding in linux to know where to begin debugging this. does your version of dahdi on the hamvoip.org <http://hamvoip.org> site work ok? perhaps it's new bug in the Digium code, and I should go with yours in place of it.
-- Bryan Fields 727-409-1194 http://bryanfields.net
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- Bryan Fields 727-409-1194 http://bryanfields.net
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- Bryan Fields
727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic