Bob, Yes - point is here - if you follow the wiring diagram in the OP - it can't work - it doesn't have power unless you connect up the 9095 test fixture. (Pin 24). 73's, John AJ6BC On Fri, Aug 14, 2015 at 2:10 AM, kk6ecm <kk6ecm@gmail.com> wrote:
That is the 6dB amplifier talked about in http://www.dmkeng.com/images/URIx%20Data%20Sheet.pdf
Thanks, Bob kk6ecm
Sent from iPad
On Aug 13, 2015, at 10:51 PM, John C. Westmoreland, P.E. < john@westmorelandengineering.com> wrote:
Hello Again,
To get correct results - doesn't it make more sense to wire up this: http://www.dmkeng.com/images/URIx_TEST_FIXTURE.pdf
From the above - how does AIN (pin 24) work?
73's, John AJ6BC
On Wed, Aug 12, 2015 at 10:39 PM, John C. Westmoreland, P.E. < john@westmorelandengineering.com> wrote:
Hello All,
Here is the wiring instructions from the FAQ:
Pin 1 to Pin 7 Pin 2 to Pin 3 Pin 4 to Pin 8 *Pin 23 to Pin 24* 10K Resistor between Pins 21 and 22 10K Resistor between Pins 21 and *23* For URIx (CM119) only, also include the following connections: Pin 5 to Pin 10 Pin 6 to Pin 11
From uridiag:
Enter your selection:c Special Test Cable Pinout:
25 pin D-shell connector Pin 1 to Pin 7 Pin 2 to Pin 3 Pin 4 to Pin 8 * Pin 11 to Pin 24* 10K Resistor between Pins 21 & 22 10K Resistor between Pins 21 & 23 For URIx (CM119), also include the following: Pin 5 to Pin 10 Pin 6 to Pin* 11* Do *NOT* include these for the standard URI!!
So, which one of these do I use?
73's, John AJ6BC
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.