did you issue the command: journalctl -xe The answer may be in it's output. On Thu, May 17, 2018 at 11:29 AM, Russell Thomas <russell@kv4s.com> wrote:
So, I scraped and restarted a fresh image with AWS. This time, I installed Ubuntu 16.04. ASL appeared to install fine. I edited several of the config files for the node (which is setup as hub no radio)
i went to start asterisk and got this and I need some help: ~$ sudo astup.sh Starting asterisk... systemctl start asterisk.service A dependency job for asterisk.service failed. See 'journalctl -xe' for details.
then i tried the following: $ sudo asterisk -rvvv
AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version 004b9dd Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
Asterisk directory:
$ dir amd.conf extensions.conf pi.conf simpleusb.conf asterisk.conf features.conf pi-dsp.conf simpleusb_tune_usb_1999.conf beagle.conf gps.conf pi-nodsp.conf sip.conf chan_dahdi.conf iax.conf pi_tune_1.conf tlb.conf custom indications.conf pi_tune_2.conf usbradio.conf dnsmgr.conf logger.conf res_snmp.conf usbradio_tune_usb_1999.conf dundi.conf manager.conf rpt.conf voter.conf echolink.conf modules.conf savenode.conf
73, Russell Thomas, KV4S NWS Liaison and Station Trustee http://alert-alabama.org
Cell: 205.202.1701 DMR: 3101393 D-Star: KV4S AllStar: 47923 EchoLink: KV4S-L (1003254) HamShackHotline: 4225 Web: http://KV4S.com
On Mon, May 14, 2018 at 4:27 PM, Tom Hayward <tom@tomh.us> wrote:
On Mon, May 14, 2018 at 2:03 PM Russell Thomas <russell@kv4s.com> wrote:
thank you.
it doesn't appear everything updates?
We're getting outside of the scope of this mailing list now, but make sure your EC2 instance has a public IP address, your VPC has an internet gateway, and your routing table has a default route to that internet gateway. For updates, you could also get away with a NAT gateway, and default route in your table to that NAT gateway, but for Allstar you'll want the public IP address.
Tom KD7LXL
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.