Thats the info I have!.. but cant find the physical place on the board!.... Unless I dont look at the good board.. ;-) --- Message initial --- De : "Bryan D. Boyle" <bdboyle@bdboyle.com> Envoyé : 2 juin 2013 17:01 A : "pete M" <petem001@hotmail.com> Cc: App_rpt-users@ohnosec.org Objet : Re: [App_rpt-users] Need connection for msf5000. from my notes: all on control board. tp3: discriminator rx tp4: tx in tp9: ptt active low ag: ground there's extensive docs on repeater-builder.com, free for the asking, that goes into EVERYTHING you may need to know about interfacing to the 5k. -- Bryan Sent from my iPhone 5...small keyboard, big fingers...please forgive misspellings... On Jun 2, 2013, at 16:36, pete M <petem001@hotmail.com> wrote:
Been looking all over the place for a good info on how to interface my msf5000 to my URI.
Got some stuff that point to some test point, but I just cant find them on the digital control board.
Anyone have a photo or a service manual the point where are the test point on the controler so that I can find them? Getting pretty frustrated here...
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users