Bryan, Stop asterisk: service asterisk stop Verify asterisk is stopped: ps ax | grep asterisk If you see /usr/sbin/asterisk it is not stopped killall -9 asterisk ps ax | grep asterisk If you see /usr/sbin/asterisk it is not stopped Change compiler setting: cd /usr/src/astsrc-1.4.23-pre/asterisk make menuselect select 10. Compiler Flags select 6. RADIO_RELAX set to taste x make make install service asterisk start 73, Steve N4IRS On 2/16/2016 9:33 AM, Bryan Taylor wrote:
Hello all,
Have several nodes running on allstarlink, some x86 and some raspberry pi2's. I have noticed the false dtmf issue on each node and would like to recompile app_rpt to set the radio relax feature accordingly to reduce/eliminate the false dtmf tones that get decoded from voice transmissions. All nodes are running the latest dial installation, does anyone know the correct procedure to do this on a dial system?
Thanks Bryan Vo1mxz Sent from my iPhone 6
On Feb 15, 2016, at 12:34 PM, Kevin Custer <kuggie@kuggie.com <mailto:kuggie@kuggie.com>> wrote:
This is now answered in the DIAL FAQ:
http://docs.allstarlink.org/drupal/node/170
Kevin
On 2/15/2016 9:54 AM, Steve Zingman wrote:
Jim, Any node can be a "HUB" A node is not limited to one connection. There may be hardware limitation about the number of connections a given piece of hardware and internet connection can support. Typically, a HUB is located on a higher bandwidth internet connection and is running a more "stout" piece of hardware. A HUB usually does not have a node radio connected to it, but there is no reason it can't. A HUB usually runs DAHDI/pseudo for it's rxchannel.
As a example HUB 2100 is running on a decent internet connection and decent hardware. We are running the beta test of the DMR <---> AllStar gateway on it so it has a NW Digital DV3000 connected and is using chan_usrp instead of pseudo for it's rxchannel.
Hope this helps.
73, Steve N4IRS
On 2/14/2016 5:24 PM, Jim Aspinwall wrote:
What if anything are the specific differences between a single node (tied to simplex, repeater, Pi box and headset...) that can presumably only accept one in-bound call/connect, and a hub, to which many can connect and bridge through/over?
Given a certain amount of specialization or purpose/interest-built hubs I am interested in having a purpose-built hub for a few systems and users not exclusive but so as not to impose on others' hubs and traffic.
What does it take to do this?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.