Isn't Allstar full duplex? Just turn off the time out timer and strap the COR on all the time. 73 Jim W7RY -----Original Message----- From: kk6ecm Sent: Wednesday, September 30, 2015 2:19 PM To: Bryan D. Boyle Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Interfacing URI to TS480 Don't know if it's possible, but wondering the same thing myself. As for COR, you can generate a pseudo COR by detecting the presence of audio. I have a repeater radio I'm working on for the club that was previously modified using a double transistor pair that sets the output to the voltage rail upon detecting audio... Sort of latches up., and drops when audio drops.... With HF, ere can be a lot of noise, so the level needs to be adjusted, kind of like a squelch. Thanks, Bob kk6ecm Sent from iPad
On Sep 30, 2015, at 1:50 PM, Bryan D. Boyle <bdboyle@bdboyle.com> wrote:
Has anyone attempted to do this? I'm thinking that there is a net I'd like to join on Weds. nights and sometimes I'm away from my house...so, it's not possible (but don't want to miss it...).
I know, what we're talking about is a remote base, in essence; however, since the characteristics of the reception of HF (where there is no concept of a COR for a useable signal) are a bit different than what is considered normal operations.
Has anyone attempted this? Am I nutz? Is it even doable with the TS480, a URI, and a node assignment?
Feel free to take offline with me if it isn't something that should clutter up the app_rpt list. Thanks
Bryan WB0YLE _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.