I have to echo Doug on the sound FOB issue. I have several systems up and running with both fobs and DMK devices have had no issues with drop outs. Now all use the same PC hardware, HP D510SFF PCs and the Compaq model under the EVO D510 label in our installations.(mainly cause they were cheap and free.) Both have no issues with motor boating or drops outs both work good last long time. Maybe you have hardware (PC) issues but to say the FOBs or DMK USB devices have issues, is bunk. Just my 2 cents -- Thanks in Advance Bob Brown, WØNQX Kansas City Metro Area http://sm0kenet.net http://byrg.net http://kcdstar.byrg.net http://w0nqx.blogspot.com Quis custodiet ipsos custodes? Its not how many watts you have, its the SIZE of your watts that matter! -- Johnny Marshall, W0JM-SK -- On Thu, Jan 12, 2012 at 9:49 AM, Doug Bade <kd8b@thebades.net> wrote:
I would have to say that the issue discussed with USB drops/pops/clicks is NOT an issue that ”has to be”… I use USB sound interfaces (CM108) for my D-Star repeater(s) running dstarrepeatercontroller software. One of my system production tests is to generate a dtmf character from my dstar portable and listen to the recovered dtmf on the far end. If you are familiar with AMBE and dtmf ** **
** **
** Snip **
*From:* app_rpt-users-bounces@ohnosec.org [mailto: app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Steve Gladden *Sent:* Thursday, January 12, 2012 10:05 AM *To:* app_rpt-users@ohnosec.org *Subject:* [App_rpt-users] USB Sucks Yay! The Sequel!****
** **
My understanding is that you can use *any* digium FXO/FXS (and possibly a less expensive clone) card it will work well and skrew the piece of crap USB interfaces. I further understand/think that it *MUST* be a two port card with both FXO and FXS present is this true? Or can you somehow get away with a single port FXO or FXS card?****
Single port cards are cost comparative to a ready made DRI USB which is --->>>>>*NOT*<<<<<--- production remote repeater site quality/capable and good only for testing experimenting etc. Even if such a card is TWICE the price of a DMK URI.. This is the way to go for a production system.. Which is *ALL* that I would ever run at a site.. And home I'll still maybe d*** around with USB interfaces which truly suck with app_rpt in ALL of my testing I've done in 3 years.
Am I clear in this understanding?****
****
Any suggestions on cards/Interfaces that work well?****
Any that don't?? stick with Digium?
I should have asked this bundle of questions 2 years ago *sigh*****
****
I realize newer boards will not have PCI slots.. "USB sucks + is unrealiable"****
-->as I have been assured both through my own testing and the developers of app_rpt.****
If you tell me you have a perfectly working sytem I'll have you do *my test* sit & listen locally at the system to the TX on continuously with PL encode and you *will* hear the audio pops & interruptions in the trasnmitted audio that I am confident are present in ALL usb installed systems :-).. but has been proven liveable for most.****
If you absolutely have to go with USB for whatever reason beagleboard etc.. small low power controller then it's time for a different controller if you require production/site performance & reliability.****
****
------------------------------
*From:* app_rpt-users-bounces@ohnosec.org [ app_rpt-users-bounces@ohnosec.org] On Behalf Of Bradley Haney [ kc9gqr@gmail.com] *Sent:* Tuesday, January 10, 2012 2:24 PM *To:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] App_rpt-users Digest, Vol 35, Issue 20****
I thought i would get the server set up and then get the USB to radio interface.. what is the best and cheap one to buy. I don't want to roll my own as if everything works out well we will move the unit to the repeater site in the Spring. But for now i was going to put it on a simplex node. I just didn't want to buy the adapter then stuck with it with no way to configure the server.. for the time being i will hook it to the ft2600 yaesu ..****
****
any thoughts on usb to radio interface?****