Hello Niagassas, I see that you are near to be ok with your project... I hope that you will have success soon. For a connection at starting Asterisk, you can use that : startup_macro = *31234*35678 You must write this into a radio setting block in rpt.conf, as your [1900] node like this : [1900] rxchannel = Zap/2 remote = y duplex=0 context=radio2 startup_macro=*31999 The main problem is to act the PTT at the other station, and for that I don't know how to do, sorry. If the second station could be a repeater in full-duplex, this could be ok, I think that it is no possible between two simplex radio, except if I am wrong (and that's possible). I believe that our friend Jim have to modify his source code a little to have this nice feature (as a transponder). This feature could be interesting for my local case too (bridging 1 VHF + 1 UHF transceivers for crossband transponding). It could be something as using the COR detection to activate all the PTT of the other simplex radio connected together. I think that it is not realy too far to the actual features of app_rpt but I am not a developper. If somebody knows how to do without source mods... About your segmentation fault : what are your Asterisk, Zaptel and app_rpt versions ? Best 73's, F6HQZ, Francois BERGERET. -----Message d'origine----- De : app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] De la part de Niagassas Angelos Envoyé : vendredi 5 janvier 2007 21:04 À : app_rpt@lists.illiana.net Objet : [App_rpt] Asterisk App_Rpt Segmentation Fault Hello to the group, I install Asterisk from SVN repository Ver SVN-trunk-r49321 including app_rpt using a TDM400P with 2 FXS daughter boards on a system running Suse-10.1. I wiil use the simplex interface as described at http://www.hamwlan.net/images/FXS-SIMPLEX-RADIO-V2.jpg in order to interconnect 2 simplex UHF radio to create a network. Using information from Francois BERGERET (f6hqz-m@hamwlan.net) and the mailing list I made adjustments to the pertinent files as follows: # zaptel.conf e&m=1-2 loadzone=us defaultzone=us Meaning 2 FXS ports configured as E&M signalling. ;zapata.conf [channels] callwaitingcallerid=no echocancel=yes echocancelwhenbridged=yes echotraining=no relaxdtmf=yes adsi=off usercallerid=yes callgroup=1 pickupgroup=1 group=1 signalling=em_rxtx immediate=yes context=radio1 channel=1 context=radio2 channel=2 Meaning 2 FXS ports signalling = em_rxtx and immediate = yes ;rpt.conf [1999] ; Node ID of remote base rxchannel = Zap/1 ; Rx audio/signalling channel remote = y duplex=0 context=radio1 [1900] rxchannel = Zap/2 remote = y duplex=0 context=radio2 [functions-remote] [telemetry] [morse] [nodes] 1999 = radio1@192.168.0.201/1999 1900 = radio2@192.168.0.201/1900 [memory] ;extensions.conf [general] static=yes writeprotect=no autofallthrought=yes clearglobalvars=no [globals] [default] [radio1] exten => 1900,1,rpt,1900|D [radio2] exten => 1999,1,rpt,1999|D [radio-secure1] exten => 1900,1,rpt,1900|D exten => 1999,1,rpt,1999|D [radio-secure2] exten => 1900,1,rpt,1900|D exten => 1999,1,rpt,1999|D ;iax.conf [gui] type=friend context=radio-secure1 username=gui secret=******** auth=md5 disallow=all allow=gsm notransfer=yes [gui2] type=friend context=radio-secure2 username=gui secret=******** auth=md5 disallow=all allow=gsm notransfer=yes ;sip.conf [gui] type=friend context=radio-secure1 username=gui secret=******** auth=md5 disallow=all allow=gsm notransfer=yes [gui2] type=friend context=radio-secure2 username=gui secret=******** auth=md5 disallow=all allow=gsm notransfer=yes With the above configuration I configure the system. Now calling from a remote PC Using iaxRpt the 1999 node I can connect to the radio and control it turning into transmit mode and receiving as expected !!!!!!!! Calling the 1900 node I have the following indication at the Asterisk console: --Executing [1900@radio-secure1:1] Rpt(IAX2/gui-10, 1900|D) in new stack Segmentation fault Xxxxxx:~ # Questions 1. Is something wrong with node 1900 ? It appears to me totally similar to 1999. 2. In addition I need a method - configuration to have the above 2 nodes interconnected automatically at Asterisk boot (Maybe by using MeetMe). 3. Extending the above requirement same need for remote running Asterisk boxes. Is any one to help me? Thanks in advance. Niagassas Angelos Project Manager Tel. +30 210 4821492 Mob. +30 6977919262 Messenger: niagassas@hotmail.com eMail: niagassas_ang@tellas.gr