Would it make sense to use simpleusb when doing this? I've tried to use simpleusb but haven't had much luck. Is there any documentation on it? Thanks, Steve On 2/4/2011 6:17, Tim Sawyer wrote:
This board is for when your controller has only one port or no free ports. If you have a free port, app_rpt works perfectly fine with your existing controller. Just set duplex=0 and linktolink=yes. --- TIS
On Feb 3, 2011, at 8:15 AM, Jim Duuuude wrote:
Not necessarily. We have a simple board (user-buildable project) that does that very nicely. I you have a standalone repater already hooked up to a controller this board can be put in-between them and it makes it into a very nice adjunct.
JIM WB6NIL
------------------------------------------------------------------------ Date: Thu, 3 Feb 2011 11:09:34 -0500 From:kc2wdz@gmail.com <mailto:kc2wdz@gmail.com> To:app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Subject: [App_rpt-users] app-rpt with external repeater controller possible?
Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities? I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes.
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users___________________... App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users