app-rpt with external repeater controller possible?
Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities? I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes.
Not necessarily. We have a simple board (user-buildable project) that does that very nicely. I you have a standalone repater already hooked up to a controller this board can be put in-between them and it makes it into a very nice adjunct. JIM WB6NIL Date: Thu, 3 Feb 2011 11:09:34 -0500 From: kc2wdz@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] app-rpt with external repeater controller possible? Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities? I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Sounds great. Where can I find more information on this board/project? Sound just like what I need for another project. On Thu, Feb 3, 2011 at 11:15 AM, Jim Duuuude <telesistant@hotmail.com>wrote:
Not necessarily. We have a simple board (user-buildable project) that does that very nicely. I you have a standalone repater already hooked up to a controller this board can be put in-between them and it makes it into a very nice adjunct.
JIM WB6NIL
------------------------------ Date: Thu, 3 Feb 2011 11:09:34 -0500 From: kc2wdz@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] app-rpt with external repeater controller possible?
Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities? I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
This all started as a project for a slightly different purpose, but when given the need I realized that with very little difference, it could do this quite well. The initial prototype boards for this have a little boo-boo on them, and I really want a chance to run new boards that have the boo-boo fixed, and have the option for the board to be in either its original mode, or the new mode (which is what you want it for). The board is fully layed out but needs someone passionate about it to fund another board run (about $175.00). Then, I will announce it as a "legitimate" project (with, docs, pictures, schematics, etc). Are you interested in maybe helping with this? It will not only benefit you, but will make this available to the community in general in a reasonable manner. JIM WB6NIL Date: Thu, 3 Feb 2011 12:37:14 -0500 Subject: Re: [App_rpt-users] app-rpt with external repeater controller possible? From: kc2wdz@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org Sounds great. Where can I find more information on this board/project? Sound just like what I need for another project. On Thu, Feb 3, 2011 at 11:15 AM, Jim Duuuude <telesistant@hotmail.com> wrote: Not necessarily. We have a simple board (user-buildable project) that does that very nicely. I you have a standalone repater already hooked up to a controller this board can be put in-between them and it makes it into a very nice adjunct. JIM WB6NIL Date: Thu, 3 Feb 2011 11:09:34 -0500 From: kc2wdz@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] app-rpt with external repeater controller possible? Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities? I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
This board is for when your controller has only one port or no free ports. If you have a free port, app_rpt works perfectly fine with your existing controller. Just set duplex=0 and linktolink=yes. --- TIS On Feb 3, 2011, at 8:15 AM, Jim Duuuude wrote: Not necessarily. We have a simple board (user-buildable project) that does that very nicely. I you have a standalone repater already hooked up to a controller this board can be put in-between them and it makes it into a very nice adjunct. JIM WB6NIL Date: Thu, 3 Feb 2011 11:09:34 -0500 From: kc2wdz@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] app-rpt with external repeater controller possible? Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities? I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Would it make sense to use simpleusb when doing this? I've tried to use simpleusb but haven't had much luck. Is there any documentation on it? Thanks, Steve On 2/4/2011 6:17, Tim Sawyer wrote:
This board is for when your controller has only one port or no free ports. If you have a free port, app_rpt works perfectly fine with your existing controller. Just set duplex=0 and linktolink=yes. --- TIS
On Feb 3, 2011, at 8:15 AM, Jim Duuuude wrote:
Not necessarily. We have a simple board (user-buildable project) that does that very nicely. I you have a standalone repater already hooked up to a controller this board can be put in-between them and it makes it into a very nice adjunct.
JIM WB6NIL
------------------------------------------------------------------------ Date: Thu, 3 Feb 2011 11:09:34 -0500 From:kc2wdz@gmail.com <mailto:kc2wdz@gmail.com> To:app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Subject: [App_rpt-users] app-rpt with external repeater controller possible?
Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities? I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes.
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users___________________... App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Yes, simpleusb is what I'm using on my nodes. What isn't working for you? -- Tim :wq On Feb 4, 2011, at 11:25 AM, Steve Passmore wrote:
Would it make sense to use simpleusb when doing this? I've tried to use simpleusb but haven't had much luck. Is there any documentation on it?
Thanks, Steve
On 2/4/2011 6:17, Tim Sawyer wrote:
This board is for when your controller has only one port or no free ports. If you have a free port, app_rpt works perfectly fine with your existing controller. Just set duplex=0 and linktolink=yes. --- TIS
On Feb 3, 2011, at 8:15 AM, Jim Duuuude wrote:
Not necessarily. We have a simple board (user-buildable project) that does that very nicely. I you have a standalone repater already hooked up to a controller this board can be put in-between them and it makes it into a very nice adjunct.
JIM WB6NIL
Date: Thu, 3 Feb 2011 11:09:34 -0500 From: kc2wdz@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] app-rpt with external repeater controller possible?
Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities? I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Yes, simpleusb is what I'm using on my nodes. What isn't working for you? -- Tim :wq
On Feb 4, 2011, at 11:25 AM, Steve Passmore wrote:
Would it make sense to use simpleusb when doing this? I've tried to use simpleusb but haven't had much luck. Is there any documentation on it?
Thanks, Steve
On 2/4/2011 6:17, Tim Sawyer wrote:
This board is for when your controller has only one port or no free
--- TIS
On Feb 3, 2011, at 8:15 AM, Jim Duuuude wrote:
Not necessarily. We have a simple board (user-buildable project) that does that very nicely. I you have a standalone repater already hooked up to a controller this board can be put in-between them and it makes it into a very nice adjunct.
JIM WB6NIL
Date: Thu, 3 Feb 2011 11:09:34 -0500 From: kc2wdz@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] app-rpt with external repeater controller
Is it possible to use a repeaters external controller and just use
app-rpt for it's linking capabilities?
I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes.
_______________________________________________ App_rpt-users mailing
I was trying to reconfigure a node remotely that had been using usbradio. I probably just didn't have something set right. I'll do a better test when I get some time. I was mainly curious if there was any documentation on simpleusb. Thanks, Steve On Feb 4, 2011 1:30 PM, "Tim Sawyer" <tim.sawyer@me.com> wrote: ports. If you have a free port, app_rpt works perfectly fine with your existing controller. Just set duplex=0 and linktolink=yes. possible? list App_rpt-users@ohnosec.orghttp:// ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users_______________________________________________
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (4)
-
Jim Duuuude -
KC2WDZ -
Steve Passmore -
Tim Sawyer