I assume you mean the Morse ID? That would be in the Morse stanza. ; Morse code parameters, these are common to all repeaters. ; ; [morse] ; speed=22 ; Approximate speed in WPM frequency=800 ; Morse Telemetry Frequency amplitude=4096 ; Morse Telemetry Amplitude idfrequency=880 ; Morse ID Frequency idamplitude=1024 ; Morse ID Amplitude As far as PL goes, that is set when you do the audio calibration routine (radio tune txtone). 73 Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim W7RY Sent: Friday, November 16, 2012 8:38 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Tone Levels Is there a separate setting for the identifier level? What command controls it. Does this level also control the PL transmit level? Thanks! 73 Jim W7RY