Check permissions and any special folders you may have created for scripts you are calling along with those files. for starters... I am just checking with you in a step by step. I had a strange incidence but I doubt this is the same as mine so rather than run you on some wild theory... one step at a time. Yes, I did copy my files over to the new debian from acid. It does work. ...mike/kb8jnm On 07/16/2018 11:28 PM, k7ilo1@gmail.com wrote:
I actually copied them all into the Asterisk folder and then the node became inoperable.
*From:*App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> *On Behalf Of *Mike *Sent:* Monday, July 16, 2018 7:13 PM *To:* app_rpt-users@lists.allstarlink.org *Subject:* Re: [App_rpt-users] Upgrade from Dial to ASL distro.
Did you import "ALL' of your old *.conf files, or just some ?
...mike/kb8jnm
On 07/16/2018 10:04 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote:
So this has probably already been answered and forgive me if it has.
I have a problem with reading through the crap load of emails I have. And I mean a CRAP load.
1^st . What’s the advantage (differences) to moving to the ASL distro that’s posted compared to the DIAL distro?
2^nd . Is there an upgrade path from the 1 to the other?
3^rd . I do have a hard drive where I installed the ASL version and called myself importing my settings.
My node is working well as a standard repeater but I am not registering with the ALLSTAR network and the node is not responding to ANY DTMF commands, including status, id, or any other local commands.
It transmits periodically like its id’ing but no sound. My audio is setup because ive used the echo function and that’s working properly and audio, deviation and all of the cool repeater settings are clean
Where do I need to start looking for these couple of issues?
I am back online now because I put the DIAL release hard drive back in just to be accessible for the time being.
Thanks all
Harold
K7ILO
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.