When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels. Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter. 73 Skyler KDØWHB On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote:
Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.
On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:
Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.
73 Skyler
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com