Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled. 73 Skyler
Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side. On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:
Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.
73 Skyler
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim
When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels. Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter. 73 Skyler KDØWHB On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote:
Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.
On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:
Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.
73 Skyler
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
If it was actually in remote base mode it wouldn't do this... Sent from my iPhone
On May 2, 2016, at 5:06 PM, Skyler F <electricity440@gmail.com> wrote:
When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels.
Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter.
73 Skyler KDØWHB
On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote: Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.
On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote: Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.
73 Skyler
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
What about using the localplay command rather than the playback command? On Mon, May 2, 2016 at 2:06 PM, Skyler F <electricity440@gmail.com> wrote:
When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels.
Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter.
73 Skyler KDØWHB
On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote:
Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.
On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:
Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.
73 Skyler
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
-- -- Tim
Then I won't be able to hear the telemetry with the node that has just connected to the remote base On Tue, May 3, 2016 at 5:54 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
What about using the localplay command rather than the playback command?
On Mon, May 2, 2016 at 2:06 PM, Skyler F <electricity440@gmail.com> wrote:
When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels.
Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter.
73 Skyler KDØWHB
On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote:
Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.
On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:
Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.
73 Skyler
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
Hi Skyler, Not sure if you ever got a solution for this issue. I was thinking along the lines Corey was. If you set this node up as a traditional "Dumb" remote base, then when you go into Command Mode (*4) of that node, the remote base will not transmit. That way you don't have to use the part of your script the enables and disables your transmitter. Here's a overview of how to make it a traditional remote base: *rpt.conf:* [1234] rxchannel = SimpleUSB/usb ; Set for your receive channel / device remote=y ; Set as "Dumb" node, as your script will handle the channel changes functions=functions-remote ; Wherever your functions live phone_functions=functions-remote ; Wherever your functions live [nodes] 1234 = radio@127.0.0.1/1234,NONE,y ; Remote base node Monty On Tue, May 3, 2016 at 4:55 PM, Skyler F <electricity440@gmail.com> wrote:
Then I won't be able to hear the telemetry with the node that has just connected to the remote base
On Tue, May 3, 2016 at 5:54 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
What about using the localplay command rather than the playback command?
On Mon, May 2, 2016 at 2:06 PM, Skyler F <electricity440@gmail.com> wrote:
When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels.
Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter.
73 Skyler KDØWHB
On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote:
Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.
On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:
Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.
73 Skyler
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thank you Monty, first, I meant rptena (my version says txena) but I haven't been able to fix that issue, but isn't a really big deal. If I can run shell scrips from a remote base node, I'm all for using that functionality. I haven't been able to get cmd to work from it, however. Remote VHF - 42622 Remote UHF - 40764 On Thursday, September 29, 2016, Monty <monty@ke7jvx.com> wrote:
Hi Skyler,
Not sure if you ever got a solution for this issue. I was thinking along the lines Corey was. If you set this node up as a traditional "Dumb" remote base, then when you go into Command Mode (*4) of that node, the remote base will not transmit. That way you don't have to use the part of your script the enables and disables your transmitter. Here's a overview of how to make it a traditional remote base:
*rpt.conf:*
[1234] rxchannel = SimpleUSB/usb ; Set for your receive channel / device remote=y ; Set as "Dumb" node, as your script will handle the channel changes functions=functions-remote ; Wherever your functions live phone_functions=functions-remote ; Wherever your functions live
[nodes] 1234 = radio@127.0.0.1/1234,NONE,y ; Remote base node
Monty
On Tue, May 3, 2016 at 4:55 PM, Skyler F <electricity440@gmail.com <javascript:_e(%7B%7D,'cvml','electricity440@gmail.com');>> wrote:
Then I won't be able to hear the telemetry with the node that has just connected to the remote base
On Tue, May 3, 2016 at 5:54 PM, Tim Sawyer <tisawyer@gmail.com <javascript:_e(%7B%7D,'cvml','tisawyer@gmail.com');>> wrote:
What about using the localplay command rather than the playback command?
On Mon, May 2, 2016 at 2:06 PM, Skyler F <electricity440@gmail.com <javascript:_e(%7B%7D,'cvml','electricity440@gmail.com');>> wrote:
When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels.
Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter.
73 Skyler KDØWHB
On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com <javascript:_e(%7B%7D,'cvml','tisawyer@gmail.com');>> wrote:
Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.
On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com <javascript:_e(%7B%7D,'cvml','electricity440@gmail.com');>> wrote:
Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.
73 Skyler
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <javascript:_e(%7B%7D,'cvml','App_rpt-users@ohnosec.org');> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com <javascript:_e(%7B%7D,'cvml','electricity440@gmail.com');>
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com <javascript:_e(%7B%7D,'cvml','electricity440@gmail.com');>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <javascript:_e(%7B%7D,'cvml','App_rpt-users@ohnosec.org');> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mai lman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
Hi again everyone. I already have one node up and running, but wanted to create another 2. One for work that I can leave running and one for in the car. How do i request more nodes via my account ? If I go to “request nodes”, it shows my current node and then gives me a comments box to write in, however it also states “The "Comments" field (below) is for comments regarding THIS node request only. If you want additional node numbers, do them as separate requests!!” As such i’m a little confused as to how to request a couple of extra node numbers. Yours, Gareth
On 9/30/2016 11:46 AM, Gareth Jackson wrote:
Hi again everyone.
I already have one node up and running, but wanted to create another 2. One for work that I can leave running and one for in the car.
How do i request more nodes via my account ? If I go to “request nodes”, it shows my current node and then gives me a comments box to write in, however it also states “The "Comments" field (below) is for comments regarding THIS node request only. If you want additional node numbers, do them as separate requests!!”
As such i’m a little confused as to how to request a couple of extra node numbers.
Just press the "Submit Request" button at the bottom. Then, do the process again. Kevin
When in "Remote Base" mode, the node is essentially dead, will not respond or do any commands unless another node is connected to it. Maybe that is why you are having issues? Monty On Fri, Sep 30, 2016 at 8:19 AM, Skyler F <electricity440@gmail.com> wrote:
Thank you Monty, first, I meant rptena (my version says txena) but I haven't been able to fix that issue, but isn't a really big deal.
If I can run shell scrips from a remote base node, I'm all for using that functionality. I haven't been able to get cmd to work from it, however.
Remote VHF - 42622 Remote UHF - 40764
On Thursday, September 29, 2016, Monty <monty@ke7jvx.com> wrote:
Hi Skyler,
Not sure if you ever got a solution for this issue. I was thinking along the lines Corey was. If you set this node up as a traditional "Dumb" remote base, then when you go into Command Mode (*4) of that node, the remote base will not transmit. That way you don't have to use the part of your script the enables and disables your transmitter. Here's a overview of how to make it a traditional remote base:
*rpt.conf:*
[1234] rxchannel = SimpleUSB/usb ; Set for your receive channel / device remote=y ; Set as "Dumb" node, as your script will handle the channel changes functions=functions-remote ; Wherever your functions live phone_functions=functions-remote ; Wherever your functions live
[nodes] 1234 = radio@127.0.0.1/1234,NONE,y ; Remote base node
Monty
On Tue, May 3, 2016 at 4:55 PM, Skyler F <electricity440@gmail.com> wrote:
Then I won't be able to hear the telemetry with the node that has just connected to the remote base
On Tue, May 3, 2016 at 5:54 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
What about using the localplay command rather than the playback command?
On Mon, May 2, 2016 at 2:06 PM, Skyler F <electricity440@gmail.com> wrote:
When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels.
Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter.
73 Skyler KDØWHB
On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote:
Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.
On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:
Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.
73 Skyler
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
Correct, but remote base mode will not execute certain commands that normal mode will execute like the cop functions. How am I supposed to steer my custom radio in remote base mode, if I can't execute custom commands. Thats why the node I set up on Blue Mountain out of a 40 channel GM300 is built off of a normal node. Skyler On Fri, Sep 30, 2016 at 11:07 AM, Monty <monty@ke7jvx.com> wrote:
When in "Remote Base" mode, the node is essentially dead, will not respond or do any commands unless another node is connected to it. Maybe that is why you are having issues?
Monty
On Fri, Sep 30, 2016 at 8:19 AM, Skyler F <electricity440@gmail.com> wrote:
Thank you Monty, first, I meant rptena (my version says txena) but I haven't been able to fix that issue, but isn't a really big deal.
If I can run shell scrips from a remote base node, I'm all for using that functionality. I haven't been able to get cmd to work from it, however.
Remote VHF - 42622 Remote UHF - 40764
On Thursday, September 29, 2016, Monty <monty@ke7jvx.com> wrote:
Hi Skyler,
Not sure if you ever got a solution for this issue. I was thinking along the lines Corey was. If you set this node up as a traditional "Dumb" remote base, then when you go into Command Mode (*4) of that node, the remote base will not transmit. That way you don't have to use the part of your script the enables and disables your transmitter. Here's a overview of how to make it a traditional remote base:
*rpt.conf:*
[1234] rxchannel = SimpleUSB/usb ; Set for your receive channel / device remote=y ; Set as "Dumb" node, as your script will handle the channel changes functions=functions-remote ; Wherever your functions live phone_functions=functions-remote ; Wherever your functions live
[nodes] 1234 = radio@127.0.0.1/1234,NONE,y ; Remote base node
Monty
On Tue, May 3, 2016 at 4:55 PM, Skyler F <electricity440@gmail.com> wrote:
Then I won't be able to hear the telemetry with the node that has just connected to the remote base
On Tue, May 3, 2016 at 5:54 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
What about using the localplay command rather than the playback command?
On Mon, May 2, 2016 at 2:06 PM, Skyler F <electricity440@gmail.com> wrote:
When I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels.
Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter.
73 Skyler KDØWHB
On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote:
Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.
On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:
Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.
73 Skyler
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
-- -- Tim
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
participants (6)
-
Corey Dean -
Gareth Jackson -
Kevin Custer -
Monty -
Skyler F -
Tim Sawyer