I think you will have to "front end" it with an inexpensive 2 port controller such as an NHRC-4 (available in kit form), an RC-100 or Linker II. Then you set the RTCM (and node) for simplex or duplex non-repeat. This is what I'm implementing right now with the NHRC. Gotta have duplex mobile!!! tnx Mike / W5JR Milton GA
On Dec 22, 2013, at 5:01 PM, "41.2 Jim" <41.2jim@gmail.com> wrote:
I understand that when the RTCM goes into fail-over / off-line mode and it becomes a simple repeater, and that all the local repeater audio delay goes away(confirmed), Is their a way to use the RTCM in this mode and not be "off-line" ? So we have the system behave normally (not off-line) but with no local repeater audio delay?(easier to duplex with no delay)
I have been looking through the archives to find the thread as I was advised that this modification can / has been be done and it's in the archives somewhere, I just cant find it Or have I been miss informed?
Jim Frederick KF6QBW 446.600- 100.0 PL Repeater AllStar Node # 28839 Skype = jim41.2 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users