This is because OSS is not supported and marked as broken in current Linux distributions. You can either use a kernel that has it compiled in or you can do what I did and use: ALSA PulseAudio osspd (emulates oss through pulse) I’ll write up some basic instructions for how mine is working... but the net of it it is that without /dev/dsp1 your asl can’t send or receive audio via your sound card (URI) Maybe I’m talking out of turn, I did not read the entire thread back. Sent from the iRoad
On Jul 26, 2018, at 07:52, Bob Good <Bob@Fot.com.au> wrote:
Hi Steve
Thanks that worked…… However now all seems to load and registers OK but SimpleUSB wont loa/run ?
return email: Bob@Fot.com.au
NODE=47324 REGPASS=47324:xxxxxx@register.allstarlink.org ; This must be changed to your node number, password
Call sign: VK6ZGN Interface type: SimpleUSB/usb_47324 ; SimpleUSB Echolink Callsign: INVALID Echolink node: 000000 ASL node used:
Ping test to 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=77.5 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=70.6 ms 64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=84.1 ms 64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=84.4 ms
--- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3004ms rtt min/avg/max/mdev = 70.664/79.212/84.453/5.656 ms
Ping test to register.allstarlink.org PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data. 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=1 ttl=50 time=209 ms 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=2 ttl=50 time=208 ms 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=3 ttl=50 time=208 ms 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=4 ttl=50 time=208 ms
--- register.allstarlink.org ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3004ms rtt min/avg/max/mdev = 208.471/208.709/209.006/0.220 ms
Ouput of ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.168.39 netmask 255.255.255.0 broadcast 192.168.168.255 inet6 fe80::4f:49ff:fe38:5803 prefixlen 64 scopeid 0x20<link> ether 02:4f:49:38:58:03 txqueuelen 1000 (Ethernet) RX packets 1641 bytes 149786 (146.2 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1781 bytes 554581 (541.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 33
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 16 bytes 1312 (1.2 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 16 bytes 1312 (1.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Output of lsmod grep dahdi dahdi 200704 28
IAX2 registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 47324 58.178.114.94:64301 60 Registered
Asterisk version: Asterisk GIT Version adaec47 built by root @ odroidxu4 on a armv7l running Linux on 2018-03-07 14:53:41 UTC
Current date and time: 2018-07-26.04:32
updatenodelist service running? root 682 0.0 0.4 4428 2384 ? Ss 04:29 0:00 /bin/bash /usr/local/bin/rc.updatenodelist & root 1650 0.0 0.1 3764 560 pts/2 S+ 04:35 0:00 grep updatenodelist
/tmp/rpt_extnodes-temp file -rw-r--r-- 1 root root 0 Jul 26 04:30 /tmp/rpt_extnodes-temp
/var/lib/asterisk/rpt_extnodes file -rwx------ 1 root root 140551 Jul 26 04:26 /var/lib/asterisk/rpt_extnodes
####### Begin warnings from messages file [Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Loaded parameters from simpleusb_tune_usb_47324.conf for device usb_47324 . [Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Unable to re-open DSP device 1 (usb_47324): No such file or directory [Jul 26 04:26:42] WARNING[986] chan_simpleusb.c: Unable to re-open DSP device 1 (usb_47324): No such file or directory And so on forever !!
####### Begin warnings from messages.1 file
73 Bob VK6ZGN
From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Wednesday, 25 July 2018 17:58 To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] NanoPi
Bob, It looks like DKMS did not rebuild DAHDI properly.
Please do as root: dpkg-reconfigure asl-dahdi-linux-dkms reboot
Should now be fixed. Check DAHDI is running by: lsmod | grep dahdi
73, Steve N4IRS
On 07/25/2018 04:38 AM, Bob Good wrote:
Hi Guys
I have tried loading ASL_1.01-20180228-armhf-nanopi image onto a NanoPi
Seems to load fine I run the updates etc then the Menu all seems OK but AllStar does not seem to run ?
return email: bob@Fot.com.au
NODE=47324 REGPASS=47324:xxxxx@register.allstarlink.org ; This must be changed to your node number, password
Anyone got any ideas ??
73 VK6ZGN Bob Bob@Fot.com.au Western Australia Mob. 61 (0) 418 902 194
The contents of this e-mail (including any attachments) may be confidential and privileged. Any unauthorised use of this document or it's contents is prohibited. If you have received this e-mail in error, please notify us immediately and erase this document E&OE
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.