First off, The EEPROM notices can be safely ignored. With a modified USB fob, there is no EEPROM facility. All level settings are stored in a file. The correct command is "radio tune rxnoise". There is no "radio tune" command. You should have an AC noise waveform at the tap on the voltage divider during the "radio tune rxnoise" test Preferably, you should check it with a scope and see what the level is. Levels less than 50 millivolts peak to peak at the tap could be your problem. Roger F. Jordan Sr. wrote:
Hi everyone.
I am getting an error in the cli as follows.
[Feb 15 16:41:36] NOTICE [10592]: chan_usbradio.c:1079 hidthread UNSUCCESSFUL: EEPROM checksum BAD OR No EEPROM installed on channel usb
[Feb 15 16:41:36] NOTICE [10593]: chan_usbradio.c:1079 hidthread UNSUCCESSFUL: EEPROM checksum BAD OR No EEPROM installed on channel usb1
Still unable to get anything to adjust with the radio tune command.
Does the above line look familiar to anyone
Best Regards,
Roger W4RFJ
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt