I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question
Tell us more about that. You might be the first one to get this working that I know of. What did you do to get it going? If you could document what you did and possibly supply an image that would be great. 73 Doug WA3DSP http://www.crompton.com/hamradio From: mihhail.jakovlev@telegrupp.ee To: app_rpt-users@ohnosec.org Date: Sat, 15 Feb 2014 22:08:01 +0000 Subject: [App_rpt-users] private nodes with dynamic IP Hi all, I am a new app_rpt user, I have a server with installed ACID, server have static IP. I have 3 assembled RTCM boards configured as voting repeater, it works fine. One RTCM can work as simplex node too. I was compiled app_rpt for Raspberry pi with SimpleUSB, it works, but I have question: How I can connect 2 maybe 3 or more) PC based „slave“ nodes (endnodes with radio connected) to „master“ server, if only „master“ server have a static IP, and all endnodes use dynamic? Two nodes in local network with static IP works fine All my nodes a private system(s), not in Allstar network. Master server have static IP, and all endnodes (PC based and RTCMs have dynamic addresses) Thanks! Mihhail Jakovlev ES1BIS _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.