Having rtcms on the same physical switch as the server is the *most* ideal scenario you could possibly have. Should present less problems rather than more. Have you watched the RTCM's console during the drops to see if it mentions anything about GPS Unlock? If not, does it present any other data of interest when the server loses the RTCM? Also, as I remember, the LVC18 needs to be configured with its windows program for different baud rates, not sure if you're already doing that. On Mon, Jan 9, 2017 at 3:34 PM Skyler F <electricity440@gmail.com> wrote:
We are using the Garmin GPS 18, and when we switch it to 9600 Baud, the GPS light never lights up, it needs to be on 4800 baud to actually get a GPS lock.
It looks like it might have to do with the ethernet switch, tried connecting directly to the router, and no issues yet, i'll report back if it decides to randomly loose connection to LAN server again. Does anybody have experience with RTCM's on a network switch?
On Mon, Jan 9, 2017 at 4:12 PM, Joe Moskalski <kc2irv@gmail.com> wrote:
It sounds like the RTCM is losing the connection with the GPS unit. If it does, the host connection drops. I had this issue if I was using 4800 baud for my NMEA data. I switched it 9600 and the issue went away.
On Jan 9, 2017 6:01 PM, "Skyler F" <electricity440@gmail.com> wrote:
With the RTCM and the Main server on the same LAN, and the RTCM pointing at the LAN IP of the server, 10 minutes or so, the RTCM looses the master server and then comes back, it gives offline and says the host connection was lost, then quickly goes back to OK. Has anybody seen this before?
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.