On Sun, 4 May 2014, Bob wrote:
After the ACID load is complete, using a DHCP router, I run "setup" from the command prompt, and configure it manually, IP, netmask, gateway, and DSN. When I do this on a WinXp machine in the TC/IP window, connects directly to the public (static) IP just fine. When I do it on the Linux box with ACID, eth0 can't find the connection.
Bob, what you are doing seems correct. I tend to manually edit files, but there is nothing wrong doing it from 'setup'. Bottom line, there is nothing in ACID that prevents this from working. I think you probably just have some field wrong somewhere. I would approach it bottom up - try pinging the from the AllStar computer to the gateway using IP addresses, then using a symbolic name to test NDS, and work your way up. I bet you will find some subtle misconfiguraton somewhere is causing the problem. 73 Willem ================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com