The yellow host LED will be on solid when connected. The red LED will be on solid when PTT is asserted. Restart Asterisk and see if that clears up your problem. On Mar 9, 2014, at 12:22 PM, ssedgwick <ssedgwick@suddenlink.net> wrote:
I have a thru hole version of the voter board and have a few questions:
1. Should the yellow host LED be flashing or on solid? Mine is flashing 2. Should the red transmitter LED be flashing or on solid when transmitting? Mine is flashing at the same rate as the yellow host LED. 3. When I telnet into the RTCM I get the following scrolling over and over. I don't have master in the voter.conf file so I don't understand why it keep saying "ERROR! Host not acknowledging non-GPS disciplined operation"
<System Time Not Set> Host Connection established (Pri) (192.168.1.195) <System Time Not Set> ERROR! Host not acknowledging non-GPS disciplined operation <System Time Not Set> Host Connection Lost (Pri) (192.168.1.195) <System Time Not Set> Host Connection established (Pri) (192.168.1.195) <System Time Not Set> ERROR! Host not acknowledging non-GPS disciplined operation <System Time Not Set> Host Connection Lost (Pri) (192.168.1.195) <System Time Not Set> Host Connection established (Pri) (192.168.1.195) <System Time Not Set> ERROR! Host not acknowledging non-GPS disciplined operation
Here is my voter.conf file
[general] port=667 buflen=500 password=ima516
[27761] client1=radios,transmit
I have the rpt.conf change from: rxchannel=Radio/usb27761 to: rxchannel=voter/27761 Any ideas?
Thanks, Steve_WB8GRS
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.