If you have a sip phone or Application, you can connect to the node with a phone to command it, and connect to other nodes just like a radio - except it can use vox or dtmf to key the xmtr depending on how it is configured. example using vox: extensions.conf: [radio-control] exten=1001,1,Answer exten=1001,n,Playback,rpt/node exten=1001,n,Rpt,1001|Pv If you want to access it from outside your home network, need to have port 5060 forwarded to your allstar box - unless you change that in sip.conf... then fwd to whatever other port is used, one big downside to opening sip, is there tend to be a lot of 'people' from other countries who try to hack/use your sip to place calls etc... so one has to be careful with opening that service to the world, iax is not as common... it is a bit safer to have 4569 open for iax - I only use the SIP internally so I don't have that issue, and use iax for other devices - Hope that helps... "Got Root?" How many software engineers does it take to change a light bulb? *None. It's a hardware problem.* Unix is user friendly. It's just very particular about who it's friends are. WINDOWS: Will Install Needless Data On Whole System MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers. A ntennas P oorly P laced L acks E ngineering The best way to accelerate a computer running Windows is at 9.81 m/s². *"I get paid to support Windows, I use Linux to get work done."* On Fri, Jun 3, 2016 at 8:47 PM, kk6ecm <kk6ecm@gmail.com> wrote:
Mark, could you say a bit about how it is used?
Thanks, Bob k6ecm 73
Sent from iPad
On Jun 3, 2016, at 8:35 PM, Mark Johnston <markjohnston73@gmail.com> wrote:
I use this in my sip.conf for the Polycom phone that I have here.
[polycom]
type=friend
context=radio-control
secret=yoursupersecretPW
host=dynamic
dtmfmode=rfc2833
username=polycom
disallow=all
allow=ulaw
progressinband=yes
transfer=no
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.