Was it “ERROR[535] chan_usbradio.c: HID process has died or something!!” Bob Sent from iPad
On Nov 15, 2017, at 9:03 PM, Benjamin Naber <Benjamin@Project23D.com> wrote:
Bob,
I got the "Died or something" error before in the past. I laughed for days after I saw that, programmers got jokes!
The issue with mine was the USB hardware in the computer was failing. I have no idea what, but something was. It "Died or something!"
Not really sure what that error really meant, I took the DOM (flash memory module with 40 pin header instead of USB, I was using a neoware thin client computer with Limey Linux) and put the DOM in another machine, attached the URi and all was well.
Gotta love cryptic errors!
~Benjamin, KB9LFZ
On Sun, 2017-11-12 at 14:24 -0800, Bob wrote: I periodically experience the following error on the RPi3 with DIAL (/var/log/asterisk/messages). Any clues? The repeater uses a URIx, and the Linux address for the USB is the same as devstr= in usbradio_tune_usb.conf
ERROR[537] chan_usbradio.c: HID process has died or something!!
[Nov 12 13:17:07] NOTICE[538] chan_usbradio.c: Assigned USB device 1- 1.2:1.0 to usbradio channel usb [Nov 12 13:17:07] WARNING[538] chan_usbradio.c: Loaded parameters from usbradio_tune_usb.conf for device usb . [Nov 12 13:17:07] WARNING[537] chan_usbradio.c: Possibly stuck USB read channel. [usb] [Nov 12 13:17:07] WARNING[537] chan_usbradio.c: Nope, USB read channel [usb] wasn't stuck after all. [Nov 12 13:38:16] ERROR[537] chan_usbradio.c: HID process has died or something!! [Nov 12 13:38:16] WARNING[520] app_rpt.c: rpt_thread restarted on node <# redacted>
The 21 min delay from the prior message is typical. After the error, it restarts asterisk, and the startup macro reconnects the repeater.
Thanks, Bob k6ecm
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.o rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.