When I have a minute to poke my head above water I'll get on the air and speak with you Tim and pummel you with questions so I don't butcher things. I basically understand it, I just want to be certain all my semicolons are where (and WHY) they're supposed to be. Bob/KK6RQ On Mon, Jan 12, 2015 at 4:26 PM, Tim Sawyer <tim.sawyer@mac.com> wrote:
There are two node list commands:
ilink 5 is list of directly connected nodes only. ilink 15 is full list of all connected nodes no mater how many hops away (AKA Long Range Sensors)
I recommend using ilink 5 in your functions and the AllStar web site for the bigger picture.
Neither command will cause remotes nodes to dump telemetry unless they have telemdefault=1 or you’re unlucky enough to hit their telemdefault=2 timeout window.
-- Tim :wq
On Jan 12, 2015, at 1:47 PM, Jah Rastafari <nuhtrue@gmail.com> wrote:
Sort of; I'm referring to the malfunction of the online/visual alternative to querying which nodes one is connected to because the Alison verbal readout pisses a lot of people off if you're connected to more than a couple.
Oh and btw the account was originally setup with the tongue-in-cheek name Jah Rastafari to order reggae records. I often forget it's even there.
-Bob/KK6RQ
On Mon, Jan 12, 2015 at 3:10 PM, Elden Fenison <w7ldn@w7ldn.com> wrote:
Not sure if your name is Jah, or Bob. But at any rate, I recently setup my first simplex allstar node and managed to hit the wrong command sequence and triggered a long train of announcements listing all the connected nodes. You mean to say that I'm not the only one who heard that? Most embarrassing. It eventually stopped abruptly and I did find myself disconnected. Hmm...
On Sun Jan 11 2015 at 8:26:09 PM Jah Rastafari <nuhtrue@gmail.com> wrote:
Yeah, I can wait and see what develops. It's not the end of the world; it's just getting the online status is better manners than subjecting everyone (who isn't on a repeater with unnecessary Alison jabbering turned off) having to hear 30 repeater connections listed over the air...
Bob/KK6RQ
On Sun, Jan 11, 2015 at 8:28 PM, <mike@midnighteng.com> wrote:
You could be having some problems with internet host (especially if it is comcast). Probably temporary, don't go changing your settings over it just yet. Give it a few days and reboots (computer and router) to see how it pans out.
...mike/kb8jnm
-------- Original Message --------
Subject: Re: [App_rpt-users] Node Status not showing...
From: Jah Rastafari <nuhtrue@gmail.com>
To: mike@midnighteng.com, "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
I went back right after reading your reply (several hours after my original post) and it in fact came up the way it should. But then 5 minutes later it went back to saying I wasn't connected. I'm not sure what it means but I can say I've never seen it behave like this before.
On Sun, Jan 11, 2015 at 4:56 PM, <mike@midnighteng.com> wrote:
Not sure but....
I think you are only suffering from a delay of the update to the
Date: Sun, January 11, 2015 9:20 pm list.
Try waiting for a short while (up to 30min) and look again. Others have said it takes that long sometimes but I have only
witnessed
about 5-6min.
Guess it depends on how busy the server is.
...mike/kb8jnm
> -------- Original Message -------- > Subject: [App_rpt-users] Node Status not showing... > From: Jah Rastafari <nuhtrue@gmail.com> > Date: Sun, January 11, 2015 5:29 pm > To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> > > > Forgive me if this has already been discussed and I missed it, but I just > noticed recently that although I was connected to a number of other > nodes/repeaters, the 'Node Status' selection on the Allstar site says I'm > not connected to anything. My node(s) show up properly in the available > node list and everything else is as it should be. The Web Transceiver works > properly also and I haven't changed anything recently. Am I missing > something? > > Bob/ KK6RQ<hr>_______________________________________________ > App_rpt-users mailing list > App_rpt-users@ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.