Jim, How about using the following command? netstat -nl This should show you open ports on your node. Here is response back on my node for port 4569. Note: in my case I have port 4569 forwarded for this node. There should be several other ports that you see with this command. (I have removed the others) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State udp 0 0 0.0.0.0:4569 0.0.0.0:* 73 Marshall - ke6pcv From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Jim Aspinwall No1PC Sent: Tuesday, April 30, 2019 6:11 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 122, Issue 18 Thanks Bryan. <EOL> issue looked fine when it was pasted in, sorry. Another question - is there a way to tell from "within the node" if port forwarding is working, like you can from a browser with canyouseeme.com, https://www.yougetsignal.com/tools/open-ports/, etc.