Bob, Try using ssh into the repeater nano /etc/asterisk/modeules.conf Under the Channels section look for the line load => chan_echolink.so ; You can also do a search in nano by hitting ctrl w and typing chan_echolink.so After your sure that noload is in front of chan_echolink.so Example noload => chan_echolink.so ; Then either reboot asterisk via using astres.sh or astdn.sh to shutdown asterisk or astup.sh to start up asterisk.. I personally recommend a full reboot Also if your not using echolink any further I recommend that you go into UFW and delete the rules for the ports 4198/udp and 4199/udp also you will need to remove 5200/tcp from the rules.. Typically after I remove those rules I tend to put deny in those ports afterwards just as an extra measure to ensure it can’t communicate.. Loren Tedford (KC9ZHV) Phone Main: 1+ (631) 686 – 8878 Option 1 Fax: 1-618-551-2755 Email: loren@lorentedford.com Email: KC9ZHV@KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net http://voipham.com From: Bob Pyke Sent: Friday, April 20, 2018 9:09 AM To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] EchoLink Server Stuck On EchoLink on our repeater is confused, and we are trying to reset. The EchoLink module has been in a “noload” state for over two days now, and the EchoLink website still shows our node as being a valid login. I’ve sent a service request in to EchoLink without response. My question is this, do I need to do more than “noload” the EchoLink module so the EchoLink server won’t see us as a login? Thanks, Bob K6ECM Sent from iPad _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.