Same here. It seems to respond to the fist [Morse] stanza. Thanks, Bob K6ECM 73
On Jan 30, 2018, at 10:25 AM, ars.w5omr@gmail.com wrote:
I ran into that years ago. There's only one stanza on a machine in rpt.conf for all nodes on that machine, as far as the CW ID is concerned.
You 'can' define a voice ID on the 'other' node and have it default to CW when in 'polite' mode, but it will revert to whatever is in the CW ID stanza.
73 = Best Regards Geoff/W5OMR (29655/56/57)
On Jan 30, 2018 04:18, Bryan Fields <bryan@bryanfields.net> wrote:
On Jan 30, 2018, at 00:12, STAN SIEMS <ssiems@mycns.net> wrote:
I am running 2 nodes 1994 and 1996 on this server with programed as below cw Id is good on mode 1996 not good on 1994 if I change the node number [morse1996] to [morse1994] the problem reverses to the other node.Does this file need to be duplicated for both nodes?
; Morse code parameters, these are common to all repeaters. ; [morse1996]
speed=20 frequency=800 amplitude=4096 idfrequency=750 idamplitude=1024
How is your node configured? You need to reference the Morse stanza in both node stanzas.
73 -- Bryan Fields M: +1-727-409-1194
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.