Re: [App_rpt-users] cw id with two nodes on server
I ran into that years ago. There's only one stanza on a machine in rpt.conf for all nodes on that machine, as far as the CW ID is concerned. You 'can' define a voice ID on the 'other' node and have it default to CW when in 'polite' mode, but it will revert to whatever is in the CW ID stanza. 73 = Best Regards Geoff/W5OMR (29655/56/57) On Jan 30, 2018 04:18, Bryan Fields <bryan@bryanfields.net> wrote:
On Jan 30, 2018, at 00:12, STAN SIEMS <ssiems@mycns.net> wrote:
I am running 2 nodes 1994 and 1996 on this server with programed as below cw Id is good on mode 1996 not good on 1994 if I change the node number [morse1996] to [morse1994] the problem reverses to the other node.Does this file need to be duplicated for both nodes?
; Morse code parameters, these are common to all repeaters. ; [morse1996]
speed=20 frequency=800 amplitude=4096 idfrequency=750 idamplitude=1024
How is your node configured? You need to reference the Morse stanza in both node stanzas.
73 -- Bryan Fields M: +1-727-409-1194
Same here. It seems to respond to the fist [Morse] stanza. Thanks, Bob K6ECM 73
On Jan 30, 2018, at 10:25 AM, ars.w5omr@gmail.com wrote:
I ran into that years ago. There's only one stanza on a machine in rpt.conf for all nodes on that machine, as far as the CW ID is concerned.
You 'can' define a voice ID on the 'other' node and have it default to CW when in 'polite' mode, but it will revert to whatever is in the CW ID stanza.
73 = Best Regards Geoff/W5OMR (29655/56/57)
On Jan 30, 2018 04:18, Bryan Fields <bryan@bryanfields.net> wrote:
On Jan 30, 2018, at 00:12, STAN SIEMS <ssiems@mycns.net> wrote:
I am running 2 nodes 1994 and 1996 on this server with programed as below cw Id is good on mode 1996 not good on 1994 if I change the node number [morse1996] to [morse1994] the problem reverses to the other node.Does this file need to be duplicated for both nodes?
; Morse code parameters, these are common to all repeaters. ; [morse1996]
speed=20 frequency=800 amplitude=4096 idfrequency=750 idamplitude=1024
How is your node configured? You need to reference the Morse stanza in both node stanzas.
73 -- Bryan Fields M: +1-727-409-1194
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
That's right. It's an old bug. Only one [morse] stanza will work. On Tue, Jan 30, 2018 at 11:20 AM, Bob Pyke <k6ecm1@gmail.com> wrote:
Same here. It seems to respond to the fist [Morse] stanza.
Thanks, Bob K6ECM 73
On Jan 30, 2018, at 10:25 AM, ars.w5omr@gmail.com wrote:
I ran into that years ago. There's only one stanza on a machine in rpt.conf for all nodes on that machine, as far as the CW ID is concerned.
You 'can' define a voice ID on the 'other' node and have it default to CW when in 'polite' mode, but it will revert to whatever is in the CW ID stanza.
73 = Best Regards Geoff/W5OMR (29655/56/57)
On Jan 30, 2018 04:18, Bryan Fields <bryan@bryanfields.net> wrote:
On Jan 30, 2018, at 00:12, STAN SIEMS <ssiems@mycns.net> wrote:
I am running 2 nodes 1994 and 1996 on this server with programed as below cw Id is good on mode 1996 not good on 1994 if I change the node number [morse1996] to [morse1994] the problem reverses to the other node.Does this file need to be duplicated for both nodes?
; Morse code parameters, these are common to all repeaters. ; [morse1996]
speed=20 frequency=800 amplitude=4096 idfrequency=750 idamplitude=1024
How is your node configured? You need to reference the Morse stanza in both node stanzas.
73 -- Bryan Fields M: +1-727-409-1194
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
Correction: The old bug I was thinking of was the related to [telemetry] stanza. And even that may have been fixed. so... never mind! On Tue, Jan 30, 2018 at 3:13 PM, Tim Sawyer <tisawyer@gmail.com> wrote:
That's right. It's an old bug. Only one [morse] stanza will work.
On Tue, Jan 30, 2018 at 11:20 AM, Bob Pyke <k6ecm1@gmail.com> wrote:
Same here. It seems to respond to the fist [Morse] stanza.
Thanks, Bob K6ECM 73
On Jan 30, 2018, at 10:25 AM, ars.w5omr@gmail.com wrote:
I ran into that years ago. There's only one stanza on a machine in rpt.conf for all nodes on that machine, as far as the CW ID is concerned.
You 'can' define a voice ID on the 'other' node and have it default to CW when in 'polite' mode, but it will revert to whatever is in the CW ID stanza.
73 = Best Regards Geoff/W5OMR (29655/56/57)
On Jan 30, 2018 04:18, Bryan Fields <bryan@bryanfields.net> wrote:
On Jan 30, 2018, at 00:12, STAN SIEMS <ssiems@mycns.net> wrote:
I am running 2 nodes 1994 and 1996 on this server with programed as below cw Id is good on mode 1996 not good on 1994 if I change the node number [morse1996] to [morse1994] the problem reverses to the other node.Does this file need to be duplicated for both nodes?
; Morse code parameters, these are common to all repeaters. ; [morse1996]
speed=20 frequency=800 amplitude=4096 idfrequency=750 idamplitude=1024
How is your node configured? You need to reference the Morse stanza in both node stanzas.
73 -- Bryan Fields M: +1-727-409-1194 <(727)%20409-1194>
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
-- Tim WD6AWP
participants (3)
-
ars.w5omr＠gmail.com -
Bob Pyke -
Tim Sawyer