I can only refer to ACID
Does anyone have information on ...
1) In rpt.conf, setting variable rxctcssfreqs, where is the table of valid RX tones?
Someone might correct me if I am wrong but "I believe" any tone is valid. You are using the freq in hz with decimal (100.0,103.5) and it is generated/decoded in dsp. Non-standard tones 'should' be able to be generated/decoded.
2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to the number of tones added to the list?
Perhaps someone knows but I have never seen it written as to a limit. Not much help on that one... Try as many as you need and see if it works.
3) Can the EchoLink section be configured to say ... W9YB Connected ... but NOT say ... to node 41111?
No, you will have the 'connected to' or nothing. eannmode=2 ;0=no announcements, 1=node number(Allstar-xlated), 2=callsign, 3=both http://ohnosec.org/drupal/node/107 It 'should be possible' to shut it off and make your own scripting using a "ON-EVENT" looking for connections from a 3xxxxx node (that were not there previously) to then speak what you want. But I have not done that myself. http://ohnosec.org/drupal/node/176 ...mike/kb8jnm
...STeve KF5VH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.