i don't get why people would want to pass DTMF over the output of the repeater. besides being anoying, it exposes your control sequence to disclosure (record, playback) and is generally considered obnoxious. here's an idea: buy a receiver board from hamtronics or bash an old mobile to get discriminator out to a URI, split the receive antenna line at the site, set up a receive node on some oddball non-interfering frequency, and code what you want into scripts and/or commands in rpt.conf. set your mobile/ht to same oddball frequency, and pound away on the keypad to your heart's content without blowing the speakers out of the radios that may be tuned to your repeater output and turning folks off to using said mschine. it's called 'out-of-band' control. -- Bryan Sent from my iPhone 5...small keyboard, big fingers...please forgive misspellings...
On Feb 20, 2014, at 11:32, <mike@midnighteng.com> wrote:
Tim and Angelo,
Can you make some macros and use ilink commands 200-215 to generate dtmf strings ? Could give you limited functionality. ???
It has been a bit of a standard with other controllers that to pass dtmf through, you just needed to start with a "#" and later digits would pass. Any chance we could have that functionality?
...mike/kb8jnm
-------- Original Message -------- Subject: Re: [App_rpt-users] Touch Tones From: Angelo Glorioso <n5uxt@hotmail.com> Date: Thu, February 20, 2014 11:09 am To: "Tim Sawyer" <tim.sawyer@mac.com> Cc: app_rpt mailing list <app_rpt-users@ohnosec.org>
Yes I have. It does not support the radio I want to use. You would think passing tones via RF would be an easy thing to do.
----- Original Message ----- From: "Tim Sawyer" <tim.sawyer@mac.com> To: "Angelo Glorioso" <n5uxt@hotmail.com> Cc: "Buddy Brannan" <buddy@brannan.name>; "app_rpt mailing list" <app_rpt-users@ohnosec.org> Sent: Thursday, February 20, 2014 10:03 AM Subject: Re: [App_rpt-users] Touch Tones
App_rpt supports some HF radios. http://ohnosec.org/drupal/node/191 Have you looked into doing it that way?
-- Tim :wq
On Feb 20, 2014, at 7:56 AM, Angelo Glorioso <n5uxt@hotmail.com> wrote:
Well, If I wanted to control another remote base (HF) outside of asterisk, it would require that tones be passed over there air. Command line would not work.
----- Original Message ----- From: "Tim Sawyer" <tim.sawyer@mac.com> To: "Angelo Glorioso" <n5uxt@hotmail.com> Cc: "Buddy Brannan" <buddy@brannan.name>; "app_rpt mailing list" <app_rpt-users@ohnosec.org> Sent: Thursday, February 20, 2014 9:44 AM Subject: Re: [App_rpt-users] Touch Tones
Understood. How about having a command or two that would send the TTs you want? http://ohnosec.org/drupal/node/94
-- Tim :wq
On Feb 20, 2014, at 7:21 AM, Angelo Glorioso <n5uxt@hotmail.com> wrote:
Hi Tim,
Thanks all for the replies. I was trying to pass the tones via RF. Not to the next node per say.
73 de Angelo
----- Original Message ----- From: "Tim Sawyer" <tim.sawyer@mac.com> To: "Buddy Brannan" <buddy@brannan.name> Cc: "app_rpt mailing list" <app_rpt-users@ohnosec.org> Sent: Thursday, February 20, 2014 9:10 AM Subject: Re: [App_rpt-users] Touch Tones
Yes, Buddy you have it right. Let’s break it down:
* is the prefix, AKA the function (or start) character. http://ohnosec.org/drupal/node/133
4 is command mode (you exit with #). http://ohnosec.org/drupal/node/21
0 is a shortcut for last node number
So for propagate_dtmf to work you have to connect to the remote node and then go into command mode.
-- Tim :wq
On Feb 20, 2014, at 6:30 AM, Buddy Brannan <buddy@brannan.name> wrote:
Wouldn’t it have to be *4[node number] to guarantee that you’re commanding the right node? *4 is the command to send commands to a remote node, thus *40 would specify to control the most recently connected node, is that not correct? Or did I get the wrong end of this?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.