I will reply below where the problems are... Corey N3FE ________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of GARY BONEBRAKE [w5bi@amsat.org] Sent: Sunday, February 13, 2011 7:03 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Remote access to node fails New node setup using Allstarlink portal download. Behind NAT on private network. All necessary ports (udp/tcp) forwarded to server IP (4569, 5004-5082, 10000-20000) DNS redirect available (w5bi.no-ip.org). 1st problem – AllstarLink Web Transceiver on separate PC on LAN will not connect to my node (works to other nodes) Not sure on this one. 2nd problem – iaxRpt works on LAN but not from outside. Am I trying something impossible? Pointing to my public IP or w5bi.no-ip.org does not work. It won't if you are behind the same firewall as the machine. You would need to be outside of your current lan with a different public IP 3rd problem – WinSCP works fine on LAN but not from outside. Same question as iaxRpt – possible? Same as above, but you also need to forward the ssh port. For Acid it is port 222 and for Xiapr it is 22. I didn't see this in your port forward list above. I probably left out some critical detail(s), but help point me in the right direction. Gary Gary Bonebrake W5BI Emergency Coordinator Sandoval County ARES w5bi@<mailto:w5bi@arrl.net>nmscares.org -- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=6E5C62FCAD.A8717>