No go. Maybe this version of Asterisk does not like the machine im running it on, (hardware as U say). Ill see if I can dig up another one around here and try it again. In the meantime ill put my old install back in so that I can be communicated with. Thanks gang and TTY soon Harold From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Bob Pyke Sent: Sunday, July 22, 2018 2:43 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Upgrade from Dial to ASL distro. Hmmm... I’d recheck settings, or perhaps your host hardware. I updated an old ACID node a few months ago with ASL on an RPi3. I did have to update some of the /etc/asterisk/*.conf files like modules.conf. I may have a short memory, but it seemed to work quit well, and it’s still online without issues. It is very stable, and used daily, connecting to other nodes, etc. Thanks, Bob K6ECM 73 On Jul 22, 2018, at 2:26 PM, <k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> > <k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> > wrote: Well at this point I am thinking that my allstar files that work flawlessly under the DIAL distro is not liked by the version of Asterisk (which I am assuming is a newer version) under the ASL distro. When I install the ASL distro and use asl-menu to reset my node up, I do show up on the stats page and I have intermittent DTMF functions meaning that the machine will response to the forced id status command and that’s about it and that’s intermittent. It will not connect to any node. I didn’t try all of course but I tried many. When I move my files from my DIAL distro, nothing works except for the repeater function. All audio levels are in spec and all file permissions are a the same as the newer version file permissions. I put my DIAL distro HD back into the machine and all is well. Umma keep that one running until I really need to upgrade because there are no other options. Thanks all for your suggestions but they are not working for me. Harold K7ILO Node 27863 Las Vegas, NV. From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org <mailto:app_rpt-users-bounces@lists.allstarlink.org> > On Behalf Of Tim Sawyer Sent: Tuesday, July 17, 2018 1:44 PM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> > Subject: Re: [App_rpt-users] Upgrade from Dial to ASL distro. There is not much to change when there is one node on your server. I learn something every time I go through the process as the comments generally get updated with each new release. Also there is a chance something will have to be different with a new release, so the safe bet is modify the existing config and read the comments: - Copy the provided config directory: /etc/asterisk to something like /etc/asterisk.orig or .bak - Grep (or search rpt.conf, extensions.conf and iax.conf) for node 1999 and change that to your node number. - In iax.conf, in addition to changing to your node number, uncomment the register line and change it to your node's password. - Also in iax.conf remember to add the port if you use something other than 4569 (your server's port on allstarlink.org <http://allstarlink.org> must match iax.conf). - In rpt.conf change rxchannel= to your channel driver. - Do the setup procedure for your channel driver or copy over the file (ex: simpleusb.conf) Having said that, doesn't ASL 1.01 have a script to help with this, 'nodesetup' or something like that? Seems like there was even a menu item for this. On Mon, Jul 16, 2018 at 9:07 PM <k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> > wrote: Right on. Ill check all permissions b4 I copy them. I don’t have anything special about my setup so all should work well. Ill work on it a little later. Time for bed. Thanks for the advice and… TTY later with updates. Harold K7ILO From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org <mailto:app_rpt-users-bounces@lists.allstarlink.org> > On Behalf Of Mike Sent: Monday, July 16, 2018 8:44 PM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Upgrade from Dial to ASL distro. Check permissions and any special folders you may have created for scripts you are calling along with those files. for starters... I am just checking with you in a step by step. I had a strange incidence but I doubt this is the same as mine so rather than run you on some wild theory... one step at a time. Yes, I did copy my files over to the new debian from acid. It does work. ...mike/kb8jnm On 07/16/2018 11:28 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: I actually copied them all into the Asterisk folder and then the node became inoperable. From: App_rpt-users <mailto:app_rpt-users-bounces@lists.allstarlink.org> <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, July 16, 2018 7:13 PM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Upgrade from Dial to ASL distro. Did you import "ALL' of your old *.conf files, or just some ? ...mike/kb8jnm On 07/16/2018 10:04 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: So this has probably already been answered and forgive me if it has. I have a problem with reading through the crap load of emails I have. And I mean a CRAP load. 1st. What’s the advantage (differences) to moving to the ASL distro that’s posted compared to the DIAL distro? 2nd. Is there an upgrade path from the 1 to the other? 3rd. I do have a hard drive where I installed the ASL version and called myself importing my settings. My node is working well as a standard repeater but I am not registering with the ALLSTAR network and the node is not responding to ANY DTMF commands, including status, id, or any other local commands. It transmits periodically like its id’ing but no sound. My audio is setup because ive used the echo function and that’s working properly and audio, deviation and all of the cool repeater settings are clean Where do I need to start looking for these couple of issues? I am back online now because I put the DIAL release hard drive back in just to be accessible for the time being. Thanks all Harold K7ILO _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.