Could put one in the Dmz but that's not best practice security wise. Can only forward 1 port so this would work. Make sure to have iptables or another firewall setup and working properly. Temporarily this would work. I run a. Vm acid test on my PC with echo link so can have one or the other typically but not both.. The UDP is more of a session than port... Think of it as this session uses these 2 ports. Sent from my iPhone Shuler Burton God bless you: השם יברך אותך -- Hashem yevarech otcha
On Jul 14, 2016, at 9:35 PM, Skyler F <electricity440@gmail.com> wrote:
I have 2 nodes under the same IP, and I am having trouble registering iax on both of them, its either or, whichever one starts asterisk first. I have properly configured the port in the iax.conf file, the rpt.conf file, and the allstar portal, but I am not able get both nodes registered with AllStar.
This problem only started happening when I configured inbound ports, 4570 UDP to one node and 4569 UDP to the other. If I turn off port forwarding, everything is fine.
One node is fine, but the other is having issues
Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 40764 <Unregistered> 60 Request Sent 67.215.233.178:4569 Y 42622 <Unregistered> 60 Request Sent
Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 42845 8.42.68.22:4569 60 Registered
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.