Iax2 not registering on a 2 node system
I have 2 nodes under the same IP, and I am having trouble registering iax on both of them, its either or, whichever one starts asterisk first. I have properly configured the port in the iax.conf file, the rpt.conf file, and the allstar portal, but I am not able get both nodes registered with AllStar. This problem only started happening when I configured inbound ports, 4570 UDP to one node and 4569 UDP to the other. If I turn off port forwarding, everything is fine. One node is fine, but the other is having issues Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 40764 <Unregistered> 60 Request Sent 67.215.233.178:4569 Y 42622 <Unregistered> 60 Request Sent Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 42845 8.42.68.22:4569 60 Registered -- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
they both cannot have the same UDP port number. Make sure you reflect the correct port numbers for the nodes at allstarlink.org Thanks, Bob k6ecm 73 Sent from iPad
On Jul 14, 2016, at 6:35 PM, Skyler F <electricity440@gmail.com> wrote:
I have 2 nodes under the same IP, and I am having trouble registering iax on both of them, its either or, whichever one starts asterisk first. I have properly configured the port in the iax.conf file, the rpt.conf file, and the allstar portal, but I am not able get both nodes registered with AllStar.
This problem only started happening when I configured inbound ports, 4570 UDP to one node and 4569 UDP to the other. If I turn off port forwarding, everything is fine.
One node is fine, but the other is having issues
Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 40764 <Unregistered> 60 Request Sent 67.215.233.178:4569 Y 42622 <Unregistered> 60 Request Sent
Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 42845 8.42.68.22:4569 60 Registered
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
It must have been a strange routing issue because it's working fine now. Yes, they are on different ports both in the conf files and the Allstar website. On Thursday, July 14, 2016, Bob Pyke <k6ecm1@gmail.com> wrote:
they both cannot have the same UDP port number. Make sure you reflect the correct port numbers for the nodes at allstarlink.org
Thanks, Bob k6ecm 73
Sent from iPad
On Jul 14, 2016, at 6:35 PM, Skyler F <electricity440@gmail.com <javascript:_e(%7B%7D,'cvml','electricity440@gmail.com');>> wrote:
I have 2 nodes under the same IP, and I am having trouble registering iax on both of them, its either or, whichever one starts asterisk first. I have properly configured the port in the iax.conf file, the rpt.conf file, and the allstar portal, but I am not able get both nodes registered with AllStar.
This problem only started happening when I configured inbound ports, 4570 UDP to one node and 4569 UDP to the other. If I turn off port forwarding, everything is fine.
One node is fine, but the other is having issues
Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 40764 <Unregistered> 60 Request Sent 67.215.233.178:4569 Y 42622 <Unregistered> 60 Request Sent
Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 42845 8.42.68.22:4569 60 Registered
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com <javascript:_e(%7B%7D,'cvml','electricity440@gmail.com');>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <javascript:_e(%7B%7D,'cvml','App_rpt-users@ohnosec.org');> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
Could put one in the Dmz but that's not best practice security wise. Can only forward 1 port so this would work. Make sure to have iptables or another firewall setup and working properly. Temporarily this would work. I run a. Vm acid test on my PC with echo link so can have one or the other typically but not both.. The UDP is more of a session than port... Think of it as this session uses these 2 ports. Sent from my iPhone Shuler Burton God bless you: השם יברך אותך -- Hashem yevarech otcha
On Jul 14, 2016, at 9:35 PM, Skyler F <electricity440@gmail.com> wrote:
I have 2 nodes under the same IP, and I am having trouble registering iax on both of them, its either or, whichever one starts asterisk first. I have properly configured the port in the iax.conf file, the rpt.conf file, and the allstar portal, but I am not able get both nodes registered with AllStar.
This problem only started happening when I configured inbound ports, 4570 UDP to one node and 4569 UDP to the other. If I turn off port forwarding, everything is fine.
One node is fine, but the other is having issues
Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 40764 <Unregistered> 60 Request Sent 67.215.233.178:4569 Y 42622 <Unregistered> 60 Request Sent
Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 42845 8.42.68.22:4569 60 Registered
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Bob Pyke -
Shuler Burton -
Skyler F