Ramesh, Hello.. For info: I have had a 2008 Acer Aspire netbook 1gb running 2 / 3 nodes simplex for over a year now via 3G. The 3G is the problem !! 73, Ian.. ________________________________ From: Ramesh Dhami (VA3UV) <Ramesh@va3uv.com> To: app_rpt <app_rpt-users@ohnosec.org> Sent: Tuesday, 13 August 2013, 3:09 Subject: Re: [App_rpt-users] ACID on a Netbook? On 12/08/2013 9:02 PM, Benjamin Naber wrote:
Ramesh,
Please explain test conditions, standards expected, and actual results.
I'm running Limey Linux on a thin client. I am using usbradio.conf/chan_usbradio and I've experience zero hangs/freezes/drop-outs/you-name-it.
DSP = CPU intensive? Unless you are running many nodes on one machine that use DSP functions, then I don't think so.
<-- Hi Benjamin; I was using ACID on a HP T5710 (~1.2GHz proc with 256MB of RAM, IIRC). I just tested with one node - if I used chan_simpleusb and half-duplex, the repeater worked fine (using an external controller of course). If I switched to chan_usbradio, dsp, full duplex (removing the external controller), I found that the repeater would remain keyed after the input signal was removed. I tried this a few times, got the same results. So, since the HP worked fine with an external controller, I used chan_simpleusb. For my own / current application, I am pursuing an IBM ThinkPad laptop Intel Dual core ~ 1.8GHz proc' which, I believe should work out fine. Cheers, Ramesh. 2182 / 2424 down due to (yet another) zapped SATA controller in an IBM Think Centre 9210. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users