Mike I think the problem is in the pi. I thought I may have tried to define usbradio but I am not 100% sure. I will attach the conf files with my codename on them. I’m not sure what you mean by which file I use. Where would I look to see which one I use. The radio is a Ten Ten Patriot usb transceiver I am using for testing. It connects with a Ten Ten USB sound card and has leads for ground, mic, audio out and PTT. I plan to later connect a Yeasu FTM100DR which I hope to operate remotely. 73, Marty
On Oct 21, 2018, at 1:12 PM, Mike <mm@midnighteng.com> wrote:
Iis the problem system a pi or pc ?
Radio interface simpleusb.conf or usbradio.conf ?
Show the contents of that file you use.
Is the radio interface a modified sound dongle or something else ?
I'm trying to determine how you should be getting your cos/ptt and then looking at your set-up for it. But it sounds like your PTT is not inverted correctly for the radio or you can't sink enough current to pull it active.
...mike/kb8jnm
On 10/21/2018 1:12 PM, Martin Boroff wrote:
I have my server node running, 49155. I am able to use it to connect to another node with iaxrpt and speak with an echo link user. I have hooked up my sound card with a radio that will run fldigi on another raspberry pi with Jessie installed. Therefore I am confident that my hardware and wiring are ok. The card is a usb card. lsusb shows The first device listed is my sound card. When I connect to my node I have been using the keypad when the call ok appears. I enter *34911. When I speak the mic meter is indicating audio but my radio does not key. I am attaching copies of rpt.conf manager.conf modules.conf Please let me know if you need anything else from asterisk directory. Thank you. Martin Boroff, WD9GYM _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.