dont know if this is still up to date.. http://ohnosec.org/pipermail/app_rpt-users/2011-April/002592.html -----Message d'origine----- From: kk6ecm Sent: Tuesday, January 5, 2016 9:59 AM To: mike@midnighteng.com Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Echolink connection announcement Volume The audio was setup using the prescribed method, without the "MK-1 calibrated ear." If we raised the rx oval, and reduced the tx level, then we'd have difficulty hearing the station id. I suspect the level of our custom recordings is too high, an I was trying to avoid the brute force method of redoing each one. Thanks, Bob kk6ecm Sent from iPad
On Jan 4, 2016, at 9:13 PM, mike@midnighteng.com wrote:
As far as I have known the answer is NO. Your problem is from improper audio levels in everything else. Your radio rx audio is probably weak "AND" the tx audio is probably high. Raise rx and drop tx and it should level out. I assume your using the 'technical ear scope' method. hihi
You can shut the announcements off. But I would suggest getting the audio correct.
...mike/kb8jnm
We have worked out all the bugs in our RPi2 w/DIAL node, and the repeater sounds fantastic. We had quite a number of Echolink connections to our local net this evening, and their audio was very good as well. We do have one question.
Is there a way to reduce the connection announcement volume during repeater use? ("Node xxxxx connected to node yyyyy.) I've been going though the docs.allstarlink.org/drupal site and not found it addressed.
Thanks, Bob kk6ecm
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.